Ceiling Mount
You can mount the device when the wall and ceiling can bear
common self‐tapping screws and the device weight (see the
section "Specifications"). The ceiling bracket is attached with the
device delivery.
1.
Mark positions of holes. Verify that holes on the wall align
with the inner holes of the ceiling bracket.
Lead cables to be connected out of wall holes.
a.
Mark positions of holes by referring to mount points of
b.
the ceiling bracket.
Inner hole of the rack
2.
Drill holes (depth: about 30 mm) on the wall by using a drill
bit of the diameter 6 mm or 6.5 mm.
Ceiling rack
9