Toyota highlander 2015 Instruction Manual page 96

96
2. Instrument cluster
Instrument panel light control
The brightness of the meter panel lights can be adjusted.
Pressing the button will adjust the
brightness of the meter panel
lights.
The brightness level of the meters
when the surroundings are bright
(day mode) and dark (night mode)
can be adjusted individually. How-
ever, when in day mode, adjusting
the brightness
change the brightness level of
night mode.
■
The meters and display illuminate when

Vehicles without a smart key system
The engine switch is in the "ON" position.

Vehicles with a smart key system
The engine switch is in IGNITION ON mode.
■
Outside temperature display
In the following situations, the correct outside temperature may not be dis-
played, or the display may take longer than normal to change.
●
When stopped, or driving at low speeds (less than 12 mph [20 km/h])
●
When the outside temperature has changed suddenly (at the entrance/exit
of a garage, tunnel, etc.)
NOTICE
■
To prevent damage to the engine and its components
●
Do not let the indicator needle of the tachometer enter the red zone, which
indicates the maximum engine speed.
●
The engine may be overheating if the engine coolant temperature gauge is
in the red zone (H). In this case, immediately stop the vehicle in a safe
place, and check the engine after it has cooled completely. (P. 626)
HIGHLANDER_U (OM48E98U)
level will also
I n f o r ma t i o n P r o v i d e d b y :