Toyota highlander 2015 Instruction Manual page 551

■
License plate lights
1
Remove the lens.
Insert a properly sized screwdriver into the hole of the lens on the inner
side and disengage the claw and pry the lens toward the outer side as
shown in the illustration.
To prevent damaging the vehicle, wrap the tip of the screwdriver with
tape.
2
Remove the light bulb.
3
When installing, reverse the steps listed.
HIGHLANDER_U (OM48E98U)
7-3. Do-it-yourself maintenance
I n f o r ma t i o n P r o v i d e d b y :
551
7