Toyota highlander 2015 Instruction Manual page 609

5
Lay the tire on the ground with
the outer surface (valve stem)
facing up.
6
When stowing the tire, make
sure that the hoist assembly is
placed perpendicular to the
wheel opening.
7
Using the jack handle and adapter socket, tighten the spare tire
clamp bolt by turning it clockwise until the tire is in the correct posi-
tion and two clicks are heard as the jack handle skips.
8
Install the inside spare tire
cover to the outside spare tire
cover.
9
Stow the jack and all tools.
HIGHLANDER_U (OM48E98U)
8-2. Steps to take in an emergency
I n f o r ma t i o n P r o v i d e d b y :
609
Valve stem
8