Toyota highlander 2015 Instruction Manual page 127

■
Switching the door unlock function (vehicles with a smart key system)
It is possible to set which doors the entry function unlocks using the wireless
remote control.
1
Turn the engine switch off.
2
When the indicator light on the key surface is not on, press and hold
or
.
The setting changes each time an operation is performed, as shown below.
(When changing the setting continuously, release the buttons, wait for at least
5 seconds, and repeat step
Multi-information display
Mono-
chrome
display
For vehicles with an alarm: To prevent unintended triggering of the alarm,
unlock the doors using the wireless remote control and open and close a door
once after the settings have been changed. (If a door is not opened within 60
seconds after
will automatically be set.)
In case that the alarm is triggered, immediately stop the alarm. (P. 83)
■
Impact detection door lock release system
In the event that the vehicle is subject to a strong impact, all the doors are
unlocked. Depending on the force of the impact or the type of accident, how-
ever, the system may not operate.
HIGHLANDER_U (OM48E98U)
3-2. Opening, closing and locking the doors
for approximately 5 seconds while pressing and holding
2
.)
Unlocking function
Color
display
Holding the driver's door handle
unlocks only the driver's door.
Holding a passenger's door
handle unlocks all the doors.
Holding a door handle unlocks
all the doors.
is pressed, the doors will be locked again and the alarm
I n f o r ma t i o n P r o v i d e d b y :
127
,
3
Beep
Exterior:
Beeps 3 times
Interior:
Pings once
Exterior:
Beeps twice
Interior:
Pings once