Toyota highlander 2015 Instruction Manual page 165

■
Recall procedure
1
Check that the shift lever is in P.
2
Turn the engine switch to IGNITION ON mode.
3
Press one of the buttons for
the driving position you want
to recall until the buzzer
sounds.
■
To stop the position recall operation part-way through
Perform any of the following:
●
Press the "SET" button.
●
Press button "1" or "2".
●
Operate any of the seat adjustment switches (only cancels seat position
recall).
■
Seat positions that can be memorized (P. 155)
The seat position, with the exception of the portions adjusted by the seat
cushion length switch and lumbar support switch, can be recorded.
■
Operating the driving position memory after turning the engine switch
off
Recorded seat positions can be activated up to 180 seconds after the driver's
door is opened and another 60 seconds after it is closed again.
■
In order to correctly use the driving position memory function
If a seat position is already in the furthest possible position and the seat is
operated in the same direction, the recorded position may be slightly different
when it is recalled.
HIGHLANDER_U (OM48E98U)
3-3. Adjusting the seats
I n f o r ma t i o n P r o v i d e d b y :
165
3