Toyota highlander 2015 Instruction Manual page 75

Child restraint systems with a top tether strap
1
Raise the head restraint so that
the top tether strap can easily
be passed between the head
restraint and seatback.
If your child restraint system inter-
feres with a head restraint and can-
not be installed properly, install the
child restraint system after remov-
ing the head restraint. (P. 169)
2
Secure the child restraint sys-
tem using the seat belt or
LATCH anchors.
3
Open the anchor bracket cover,
latch the hook onto the anchor
bracket and tighten the top
tether strap.
Run the top tether strap under the
head restraint.
Make sure the top tether strap is
securely latched.
■
Laws and regulations pertaining to anchorages
The LATCH system conforms to FMVSS225 or CMVSS210.2.
Child restraint systems conforming to FMVSS213 or CMVSS213 specifica-
tions can be used.
This vehicle is designed to conform to the SAE J1819.
HIGHLANDER_U (OM48E98U)
1-1. For safe use
I n f o r ma t i o n P r o v i d e d b y :
75
1