Toyota highlander 2015 Instruction Manual page 583

Warning message
(If equipped)

Color display only
(If equipped)

Color display only
(Flashes)
(If equipped)
*
: Refer to the separate "Scheduled Maintenance Guide" or "Owner's Manual
Supplement" for the maintenance interval applicable to your vehicle.
HIGHLANDER_U (OM48E98U)
8-2. Steps to take in an emergency
Details/Actions
Indicates that the Automatic High Beam switch is
pressed while the headlights are in low beam.
 Turn the high beam on and press the Auto-
matic High Beam switch again.
Indicates that, since the VSC (Vehicle Stability
Control) system was turned off, the pre-collision
brake system operation is stopped
 Turn the VSC on. (P. 301)
Indicates that the PCS (Pre-collision system) is
not currently functional because the grille cover
or the sensor is dirty
 Check the grille cover and the sensor and
clean them if they are dirty.
I n f o r ma t i o n P r o v i d e d b y :
583
8