Canon imageRUNNER Advance 6275 Basic Operation Gude page 183

Additional Information
The Job Build mode is useful if you cannot
load the originals all at once. This mode
enables you to divide the originals into
several parts, scan them, and then print
them all together.
3
Can a mark be applied to the
document that has been scanned?
The machine can print a stamp on
the scanned document by using
the Stamp mode.
Position at which
stamp is applied
Vertical Placement
Position at which
stamp is applied
Horizontal Placement
■ Setting procedure:
1. Press [Scan and Send] or [Fax] 
[Options].
2. Press [Finished Stamp]  [Close].
Additional Information
After the original is sent, you can also
send a job done notice to the specified
e-mail address (Job Done Notice). For more
information, see e-Manual > Scan and Send,
or Fax.
4
Do I need to enter the address of
the recipient every time?
You can store frequently used
destination in the Address
Book. If the destination is stored
beforehand, you do not need to
enter the destination every time.
■ Storing from the Remote UI:
1. Click [Address Book]  select the
destination to register.
2. Click [Register New Destination] 
select the type of destination  enter
necessary items.
3. Click [OK].
Q&A
183