Canon imageRUNNER Advance 6275 Basic Operation Gude page 37

3
Specify the Destination
Press [Address Book]  select destination  press [OK].
Press [Address Book].
If you are sending to only one destination, select a destination. If you
are sending to multiple destinations, select the destinations  press
[OK].
For more information on storing the destination
in the address book, see e-Manual > Scan and
Send.
You can specify the destination using the one-
touch buttons or frequently used settings. Also,
if you want to send to a new destination not
yet stored, press [New Destination]  enter the
destination.
4
Start Sending
After specifying the settings, press
Press (Start).
If the following screen appears, press
to scan the next original. After all of the originals
are scanned, press [Start Sending].
When sending is complete, remove your originals.
After a job is sent, the send settings may be
retained except the specifi ed destinations.
To cancel the settings, press
To send other jobs with the same settings,
specify destinations for the jobs as the
destination specifi ed for the previous job is not
retained.
(Start).
(Start)
(Reset).
37