Canon imageRUNNER Advance 6275 Basic Operation Gude page 150

Output Area
Open the output slot on the outside of the fi nisher, and remove any jammed
1
paper that is visible.
If you cannot see any jammed paper, check if any jammed paper is stuck inside the output area of
the fi nisher.
If a paper jam occurs when you are printing in the Staple mode, do not remove the output sheets that are
waiting to be stapled. (Printing and stapling resume after you clear the paper jam.)
Open the front cover of the fi nisher.
2
*1 Booklet Finisher-P1
*2 Staple Finisher-P1
If the Document Insertion/Folding Unit-H1 or Document Insertion Unit-L1 is attached, open the
insertion unit.
150
*1
1 Open the output slot.
2 Remove any jammed paper.
3 Close the output slot.
*2