Canon imageRUNNER Advance 6275 Basic Operation Gude page 82

Load the paper stack into the document insertion unit.
3
Load the paper face up.
Select the desired paper size  press [Next].
4
Select the same paper size that is loaded in the Document Insertion/Folding Unit-H1 or Document Insertion
Unit-L1.
To select an A or B series paper size, press [Inch Size].
Select the desired paper type  press [OK].
5
When printing on special types of paper, such as heavy paper, be sure to correctly set the paper type. If the
type of paper is not set correctly, it could adversely aff ect the quality of the image. Moreover, the fi xing unit
may become dirty and require a service repair, or the paper could jam.
• Only load paper for use as a cover.
• You cannot make copies or prints on paper that is loaded in the Document Insertion/Folding Unit-H1 or
Document Insertion Unit-L1.
• You can load the coated paper (29 lb bond to 140 lb index (106 to 256 g/m
Insertion/Folding Unit-H1 or Document Insertion Unit-L1. You cannot load the coated paper into the
Paper Drawer (Right/Left), Paper Drawer 3 and 4, multi-purpose tray, Paper Deck Unit-A1, or Paper Deck
Unit-D1.
• A maximum of 100 sheets of paper (20 lb bond (80 g/m
Insertion/Folding Unit-H1 or Document Insertion Unit-L1.
82
2
)) into the Document
2 )) can be loaded in the tray of Document