Canon imageRUNNER Advance 6275 Basic Operation Gude page 205

39
It seems as though turning OFF
the machine is different from the
previous imageRUNNER. I am
afraid that this may be a wrong
operation.
For the previous imageRUNNER,
you needed to press and hold the
control panel power switch for
more than three seconds before
the machine entered the Shutdown
mode.
However, for the imageRUNNER
ADVANCE, you just need to open
the main power switch cover
located on the right side of the
machine, and push the main power
switch toward the " " side.
Additional Information
For more information, see Before Using This
Machine.
40
The touch panel display is
completely black.
The main power has not been
turned ON, or the machine may
have entered the Auto Sleep
mode to save energy. Follow the
procedure below.
■ Turning the main power ON
1. Check whether the power plug is firmly
inserted into the outlet.
2. Open the main power switch cover
located on the right side of the machine
and switch the main power switch to the
"I" side to turn the power ON.
■ Recovering from the Auto Sleep
mode
Press the (Energy Saver).
Additional Information
• For more information on the Auto Sleep
mode and Energy Saver mode, see
e-Manual > Basic Operations.
• Follow the procedure below to change the
Auto Sleep Time.
1. Press (Settings/Registration).
2. Press [Preferences]  [Timer/Energy
Settings]  [Auto Sleep Time].
3. Specify the time  press [OK].
Q&A
205