Toe-In - Branson 00 series Operator's Manual

22. TOE-IN

If the toe-in is not properly aligned, the steering
wheel may be uncontrollable or the tractor may
produce an abnormal vibration. Measure the
distance A and B of the front wheels and see if the
different between the two measurements is 0.15 ~
0.3 in.(4~8mm) If not, loosen nuts at the end of the
cylinder rod on both sides and adjust the length of
the screws. Tighten the nuts when the toe-in is
0.15 ~ 0.3 in.(4~8mm)
- 81 -