Entering And Leaving The Pavement; Turning On The Pavement - Branson 00 series Operator's Manual

8. ENTERING AND LEAVING THE PAVEMENT

Enter or leave the pavement in a perpendicular
direction. When climbing onto the pavement, lower
the implement to achieve a lower center of gravity.
Once all wheels of the tractor are on the pavement,
raise the implement.

9. TURNING ON THE PAVEMENT

When making a turn, reduce the engine rpm and
make a slow turn. When making a turn on the
pavement, remove the connector of the brake
pedals. Depress the brake pedal on the side to
which to make a turn, while steering the wheel,
this will allow the tractor to make the turn without
moving ahead. Make sure to keep the work unit
in the up position when making a turn.
• Make sure to connect the brake pedal. Otherwise, the tractor
may turnover due to one-sided braking.
• When you cross a dike or raised ground to enter or leave the
pavement, use loading ramps with sufficient strength, and
lower the implement to achieve a lower center of gravity．
• Drive backward when climbing up a steep slope, and drive
forward when climbing down．
Make sure to release the differential gear lock before making a
turn. Otherwise, the tractor will not turn in the intended
direction but may cause an accident．
- 55 -