Branson 8050 Operator's Manual
  1. Manuals
  2. Brands
  3. Branson Manuals
  4. Tractor
  5. 8050
  6. Operator's manual

Branson 8050 Operator's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Branson 8050
Operator's manual
8050 OPERATORS MANUAL (122011).indd 1
1/10/2012 9:36:13 PM

Advertisement

Table of Contents
loading

Related Manuals for Branson 8050

Summary of Contents for Branson 8050

  • Page 1 Branson 8050 Operator’s manual 8050 OPERATORS MANUAL (122011).indd 1 1/10/2012 9:36:13 PM...

  • Page 2: Table Of Contents

    LEVER OPERATION (R) --------------------------------------------------------------------- 72 1. MID REMOTE VALVE JOYSTICK ------------------------------------------------ 73 2. MAIN GEAR SHIFT LEVER -------------------------------------------------------- 73 3. RANGE GEAR SHIFT LEVER ------------------------------------------------------ 74 4. ACCELETATION LEVER ------------------------------------------------------------ 74 • • • 8050 OPERATORS MANUAL (122011).indd 2 1/10/2012 9:36:14 PM...
  • Page 3 OPERATION & WORK ----------------------------------------------------------------------------- 88 CHECKING BEFORE OPERATION ------------------------------------------------------- 89 STARTING/STOPPING THE ENGINE ---------------------------------------------------- 96 1. TO START THE ENGINE ------------------------------------------------------------ 97 2. TO STOP THE ENGINE ---------------------------------------------------------------- 99 • • • 8050 OPERATORS MANUAL (122011).indd 3 1/10/2012 9:36:14 PM...
  • Page 4 1. ENGINE OIL ---------------------------------------------------------------------------- 123 2. TRANSMISSION / HYD FLUID ---------------------------------------------------- 124 3. FRONT AXLE FLIUD ----------------------------------------------------------------- 126 FILTERS / COOLANT REPLACEMENT -------------------------------------------------- 128 1. ENGINE OIL FILTER ----------------------------------------------------------------- 128 • • • 8050 OPERATORS MANUAL (122011).indd 4 1/10/2012 9:36:14 PM...
  • Page 5 14. COLOR OF EXHAUST GAS ------------------------------------------------------ 148 TROUBLESHOOTING ------------------------------------------------------------------------------ 150 ENGINE ------------------------------------------------------------------------------------------- 150 CLUTCH & BRAKE ---------------------------------------------------------------------------- 154 HYDRAULIC SYSTEM ------------------------------------------------------------------------ 155 ELECTRICAL SYSTEM ----------------------------------------------------------------------- 156 SPECIFICATIONS ----------------------------------------------------------------------------------- 158 • • • 8050 OPERATORS MANUAL (122011).indd 5 1/10/2012 9:36:14 PM...
  • Page 6 THANK YOU FOR PURCHASING A BRANSON TRACTOR. Before use, read and understand this manual complete. • After reading this manual, keep it close to the tractor for immediate reference • Any one operating this tractor should review this manual. • In case this manual is lost or damaged, please contact your nearest authorized dealer for a copy.
  • Page 7 Read this Manual for correct and safe use of the product. Failure to use the product properly may result in an accident. Keep this Manual close to the tractor after you have read it. • • • 8050 OPERATORS MANUAL (122011).indd 7 1/10/2012 9:36:14 PM...

  • Page 8: General Precautions

    GENERAL PRECAUTIONS (TO ENSURE SAFE OPERATION) 8050 OPERATORS MANUAL (122011).indd 8 1/10/2012 9:36:14 PM...
  • Page 9 WARNING prevent moving while servicing. [Otherwise] [Otherwise] The exhaust gas can cause intoxication and lead to fatal An unexpected accident may occur, such as overturning consequences. of the tractor. • • • 8050 OPERATORS MANUAL (122011).indd 9 1/10/2012 9:36:15 PM...
  • Page 10 Keep a first aid kit and fire extinguisher handy Use safety work lights with protection cover- at all times while operating equipment. ing. WARNING WARNING [Otherwise] An unexpected accident may occur, possibly fire or explo- sion. • • • 8050 OPERATORS MANUAL (122011).indd 10 1/10/2012 9:36:15 PM...
  • Page 11 Never wear loose, torn or bulky clothing alcohol, medication, controlled substances around tractor or while fatigued. WARNING WARNING [Otherwise] You will be exposed to a risk of being entangled in the equipment resulting in injury. • • • 8050 OPERATORS MANUAL (122011).indd 11 1/10/2012 9:36:15 PM...
  • Page 12 You will be exposed to a risk of death or serious injury if There is a danger of death, serious injury, or damage to the tractor overturns. the tractor. • • • 8050 OPERATORS MANUAL (122011).indd 12 1/10/2012 9:36:16 PM...
  • Page 13 WARNING WARNING [Otherwise] [Otherwise] An un expected accident may occur or tractor may not There is a risk of injury. perform properly. • • • 8050 OPERATORS MANUAL (122011).indd 13 1/10/2012 9:36:17 PM...
  • Page 14 DANGER WARNING [Otherwise] [Otherwise] Fire or explosion may occur. There is a risk of fire due to short circuit. • • • 8050 OPERATORS MANUAL (122011).indd 14 1/10/2012 9:36:18 PM...
  • Page 15 WARNING WARNING has been performed. [Otherwise] The tire may blow out, causing an injury. [Otherwise] An unexpected accident may occur. • • • 8050 OPERATORS MANUAL (122011).indd 15 1/10/2012 9:36:18 PM...
  • Page 16 There is a risk of getting burnt. There is a danger of accident or injury or equipment fail- ure. Please remember that the failure due to modification may not be covered by warranty. • • • 8050 OPERATORS MANUAL (122011).indd 16 1/10/2012 9:36:19 PM...
  • Page 17 Because signal cannot be seen by nearby workers, ag- There is danger of accident or equipment failure due to ricultural equipment, automobiles, etc. It may result in a poor maintenance. cause of accident. • • • 8050 OPERATORS MANUAL (122011).indd 17 1/10/2012 9:36:19 PM...
  • Page 18 DANGER DANGER [Otherwise] [Otherwise] The fuel may ignite and fire may break out. There is a danger of fire. • • • 8050 OPERATORS MANUAL (122011).indd 18 1/10/2012 9:36:20 PM...
  • Page 19 DANGER WARNING move them. [Otherwise] [Otherwise] It may result in a fire accident or environmental pollution. It may result in a fire. • • • 8050 OPERATORS MANUAL (122011).indd 19 1/10/2012 9:36:20 PM...
  • Page 20 <Lock> position. WARNING WARNING [Otherwise] [Otherwise] The tractor may not turn to the direction you want and There is a risk of accident.. may cause an accident. • • • 8050 OPERATORS MANUAL (122011).indd 20 1/10/2012 9:36:21 PM...
  • Page 21 Supply proper lighting at all times and especially night. WARNING WARNING [Otherwise] [Otherwise] The tractor may move and cause an accident or injury. There is a danger of accident. • • • 8050 OPERATORS MANUAL (122011).indd 21 1/10/2012 9:36:21 PM...
  • Page 22 Do not dispose of chemicals on the ground or in rivers or waterways [Otherwise] You may get burnt or your clothes may be damaged. • • • 8050 OPERATORS MANUAL (122011).indd 22 1/10/2012 9:36:21 PM...
  • Page 23 WARNING CAUTION [Otherwise] [Otherwise] You may get burnt due to ignition or explosion of the There is a risk of burn or fire due to short circuit. battery. • • • 8050 OPERATORS MANUAL (122011).indd 23 1/10/2012 9:36:22 PM...
  • Page 24 [Otherwise] There is a danger of injury. [Otherwise] The oil under high pressure may cause damage to the skin or injury. • • • 8050 OPERATORS MANUAL (122011).indd 24 1/10/2012 9:36:22 PM...
  • Page 25 [Otherwise] There is a risk that you may get entangled or get injured. [Otherwise] There is a danger of accident due to poor maintenance. • • • 8050 OPERATORS MANUAL (122011).indd 25 1/10/2012 9:36:23 PM...
  • Page 26 After opening the hood for checking or main- tenance, make sure to put them in their place. CAUTION [Otherwise] There is a risk that you may get entangled in the tractor or get injured. • • • 8050 OPERATORS MANUAL (122011).indd 26 1/10/2012 9:36:23 PM...
  • Page 27 WARNING WARNING tween the implement or attachment and the tractor. [Otherwise] There is a danger of accident or injury. [Otherwise] There is a danger of accident or injury. • • • 8050 OPERATORS MANUAL (122011).indd 27 1/10/2012 9:36:23 PM...
  • Page 28 [Otherwise] [Otherwise] There is a danger of accident or injury due to loss of bal- The implement unit may fall down and there is a risk of ance. injury • • • 8050 OPERATORS MANUAL (122011).indd 28 1/10/2012 9:36:23 PM...
  • Page 29 WARNING WARNING a turn. [Otherwise] [Otherwise] There is a danger of turning over. There is a danger of person injury or a collision of the implement. • • • 8050 OPERATORS MANUAL (122011).indd 29 1/10/2012 9:36:24 PM...
  • Page 30 WARNING WARNING [Otherwise] [Otherwise] There is a risk of accident or injury. There is a risk of personal injury or damage to the trac- tor. • • • 8050 OPERATORS MANUAL (122011).indd 30 1/10/2012 9:36:24 PM...
  • Page 31 There is a risk of overturning accident due to loss of bal- The performance of the implement may not properly ance. work and there is a risk of accident or injury or damage to the tractor. • • • 8050 OPERATORS MANUAL (122011).indd 31 1/10/2012 9:36:24 PM...
  • Page 32 Never tow anything with the top link or the when dismantling lower link. WARNING WARNING [Otherwise] [Otherwise] There is a danger of an unexpected death accident. Tractor may turn over. • • • 8050 OPERATORS MANUAL (122011).indd 32 1/10/2012 9:36:25 PM...
  • Page 33 [Otherwise] The tractor may not turn to the direction you want and [Otherwise] cause an accident and damage the tractor. There is a risk of accident or injury. • • • 8050 OPERATORS MANUAL (122011).indd 33 1/10/2012 9:36:25 PM...
  • Page 34 [Otherwise] tractor. The tractor may roll backward or fall off causing accident [Otherwise] or injury. The tractor may roll backward or fall off causing accident or injury. • • • 8050 OPERATORS MANUAL (122011).indd 34 1/10/2012 9:36:26 PM...
  • Page 35 The tractor may overturn due to one-sided braking when the brake pedal is depressed in an emergency. [Otherwise] The tractor may roll backward or fall off causing accident or injury. • • • 8050 OPERATORS MANUAL (122011).indd 35 1/10/2012 9:36:26 PM...
  • Page 36 WARNING WARNING strength. [Otherwise] [Otherwise] There is a risk of slipping, rolling, or overturning. There is a risk of accident that the tractor may fall off the truck. • • • 8050 OPERATORS MANUAL (122011).indd 36 1/10/2012 9:36:26 PM...
  • Page 37 The operator must remain in the seat at all WARNING WARNING and move slowly time. [Otherwise] [Otherwise] There is a risk of injury. An un expected accident may occur. • • • 8050 OPERATORS MANUAL (122011).indd 37 1/10/2012 9:36:27 PM...
  • Page 38 WARNING WARNING [Otherwise] [Otherwise] There is a risk of falling over. There is a danger of accident or injury. • • • 8050 OPERATORS MANUAL (122011).indd 38 1/10/2012 9:36:27 PM...
  • Page 39 WARNING WARNING [Otherwise] [Otherwise] There is a danger of abrupt turning or overturning due to There is a risk of overturning. one-sided braking when the brake pedal is depressed. • • • 8050 OPERATORS MANUAL (122011).indd 39 1/10/2012 9:36:28 PM...
  • Page 40 [Otherwise] There is a risk of overturning. [Otherwise] There is a risk of accident that the tractor may slip or turn over.. • • • 8050 OPERATORS MANUAL (122011).indd 40 1/10/2012 9:36:28 PM...
  • Page 41 Also, let the imple- WARNING WARNING ment rest on the ground. [Otherwise] [Otherwise] The tractor may move and cause an accident. The exhaust gas can cause intoxication and lead to fatal consequences. • • • 8050 OPERATORS MANUAL (122011).indd 41 1/10/2012 9:36:29 PM...
  • Page 42 WARNING [Otherwise] [Otherwise] There is a risk of accident to injury. There is a danger that you will get entangled in the culti- vator or sustain a serious injury. • • • 8050 OPERATORS MANUAL (122011).indd 42 1/10/2012 9:36:30 PM...
  • Page 43 [Otherwise] There is a danger of accident or injury. [Otherwise] There is a danger that the tractor may turn over due to loss of balance. • • • 8050 OPERATORS MANUAL (122011).indd 43 1/10/2012 9:36:30 PM...
  • Page 44 WARNING WARNING [Otherwise] [Otherwise] The implement may come down suddenly and cause an Hot water may splash, causing burns or damage. injury. • • • 8050 OPERATORS MANUAL (122011).indd 44 1/10/2012 9:36:31 PM...
  • Page 45 WARNING WARNING contact points are loose. move them. [Otherwise] [Otherwise] There is a danger of fire due to short circuit. There is a danger of fire. • • • 8050 OPERATORS MANUAL (122011).indd 45 1/10/2012 9:36:32 PM...
  • Page 46 “Disconnect” position. WARNING WARNING [Otherwise] [Otherwise] The tractor may move and cause injury or an accident. There is a risk of fire. • • • 8050 OPERATORS MANUAL (122011).indd 46 1/10/2012 9:36:33 PM...
  • Page 47 WARNING WARNING elling. [Otherwise] [Otherwise] There is a risk of an accident. It may cause a danger of rear-end accident. • • • 8050 OPERATORS MANUAL (122011).indd 47 1/10/2012 9:36:33 PM...
  • Page 48 Maintain the light and indication plate so it can be visible always. Immediately repair or attach the broken or missed light and indicating plates. Item regarding lighting devices (alarm lamp and safety device) CAUTION • • • 8050 OPERATORS MANUAL (122011).indd 48 1/10/2012 9:36:33 PM...
  • Page 49 You may be exposed to agricultural chemicals spray. [Otherwise] Be careful it may cause a fatal error or may not be covered by the warranty. • • • 8050 OPERATORS MANUAL (122011).indd 49 1/10/2012 9:36:33 PM...

  • Page 50: About Warranty

    ABOUT WARRANTY 8050 OPERATORS MANUAL (122011).indd 50 1/10/2012 9:36:33 PM...
  • Page 51 • Amount of work done. (square footage or number of hours) • Other information in as much detail as possible sur- rounding the circumstanced of the breakdown. • • • 8050 OPERATORS MANUAL (122011).indd 51 1/10/2012 9:36:34 PM...

  • Page 52: Overview Of The Tractor

    OVERVIEW OF THE TRACTOR 8050 OPERATORS MANUAL (122011).indd 52 1/10/2012 9:36:34 PM...
  • Page 53 OVERVIEW OF THE TRACTOR A: WORK LAMP B: ROOF C: SIDE MIRROR D: HOOD E: REAR TIRE F: FRONT TIRE G: STEP • • • 8050 OPERATORS MANUAL (122011).indd 53 1/10/2012 9:36:34 PM...
  • Page 54 OVERVIEW OF THE TRACTOR A: LOWER LINK B: REAR COMBINATION LAMP C: REAR WINDOW D: TOP LINK E: REAR REMOTE VALVE F: 3PT CONTROL SWITCH G: LIFT LINK • • • 8050 OPERATORS MANUAL (122011).indd 54 1/10/2012 9:36:37 PM...
  • Page 55 OVERVIEW OF THE TRACTOR A: AIR CLEANER B: OIL COOLER C: BATTERY D: ALTERNATOR E: HYDRAULIC PUMP F: ENGINE OIL FILTER • • • 8050 OPERATORS MANUAL (122011).indd 55 1/10/2012 9:36:37 PM...

  • Page 56: Functions

    FUNCTIONS 8050 OPERATORS MANUAL (122011).indd 56 1/10/2012 9:36:37 PM...

  • Page 57: Switches And Levers

    SWITCHES AND LEVERS 1 : STEERING WHEEL 2: DASH METER 3: F/R HYD SHUTTLE LEVER 4: TELESCOPIC ADJUST CAP 5: EMERGENCY LAMP SWITCH 6: COMBINATION LAMP SWITCH 7: MAIN KEY SWITCH • • • 8050 OPERATORS MANUAL (122011).indd 57 1/10/2012 9:36:37 PM...

  • Page 58: Main Key Switch

    Once the engine is started, take your hand off the key. The key will return to the “ON” position automatically and the engine will keep running. Turn engine off before performing any maintenance on tractor • • • 8050 OPERATORS MANUAL (122011).indd 58 1/10/2012 9:36:38 PM...

  • Page 59: Telescopic Adjust Cap

    CAUTION Turn telescopic adjusting handle CCW, then fix handle Confirm that the steering wheel is firmly fixed. at a desirable position and turn telescopic adjusting cap CW for adjustment. • • • 8050 OPERATORS MANUAL (122011).indd 59 1/10/2012 9:36:38 PM...

  • Page 60: Emergency Lamp Switch

    Press once again to can- ver forward to light for right and backward to light for left. cel. To use horn, press on side of light switch • • • 8050 OPERATORS MANUAL (122011).indd 60 1/10/2012 9:36:38 PM...

  • Page 61: Wd Shift Switch

    4WD : Four-wheel drive - This range provides full time To ensure safety, the lever must first be pulled upward for shifting to another position. four-wheel dirve. • • • 8050 OPERATORS MANUAL (122011).indd 61 1/10/2012 9:36:38 PM...

  • Page 62: Dash Meter Assy

    26: N/A 7: HEAD LIGHT (LOWER-BEAM) 17: WATER SEPARATOR 27: N/A 8: HEAD LIGHT (HIGH-BEAM) 18: PRE-HEAT LAMP 28: N/A 9: N/A 19: OIL PRESSURE 29: MFWD 20: BATTERY CHARGE • • • 8050 OPERATORS MANUAL (122011).indd 62 1/10/2012 9:36:38 PM...
  • Page 63 With the main switch in the “ON” position, turn the light switch pushed to each direction. one click to the right for low-beam and pull it up for high-beam. • • • 8050 OPERATORS MANUAL (122011).indd 63 1/10/2012 9:36:39 PM...
  • Page 64 It is used to monitor the amount of air going into the engine Lamp will light up when the water level is getting high. while running. It will be illiminated when air filter is clogged. • • • 8050 OPERATORS MANUAL (122011).indd 64 1/10/2012 9:36:39 PM...
  • Page 65 Refuel immediately as empty fuel tank may cause intake of air. If this lamp comes on while the engine is running, it indicates a problem in the engine oil system. Stop the engine immediately and check for problems. • • • 8050 OPERATORS MANUAL (122011).indd 65 1/10/2012 9:36:39 PM...
  • Page 66 Lift up lamp will light up when lift arm is lifted up by one-touch MFWD lamp will light up when MFWD lever is put at ‘ON’. moving up, or reverse moving up or turning increase to maxi- mum position. • • • 8050 OPERATORS MANUAL (122011).indd 66 1/10/2012 9:36:39 PM...
  • Page 67 If the needle is in the red zone, stop running in the far right position by 6, you will get the time in minute the engine and check for problems. • • • 8050 OPERATORS MANUAL (122011).indd 67 1/10/2012 9:36:40 PM...
  • Page 68 TROUBLE WITH 3P HITCH RAISING POWER 3402 TROUBLE WITH 3P HITCH LOWERING POWER 3403 TROUBLE WITH 3P LIFT SOLENOID 3403 COMMUNICATION ERROR * TCU : TRANSMISSION CONTROL UNIT * HCU : HYD CONTROL UNIT • • • 8050 OPERATORS MANUAL (122011).indd 68 1/10/2012 9:36:40 PM...

  • Page 69: Pedals

    FUNCTIONS PEDALS 1: CLUTCH PEDAL 2: BRAKE PEDAL (L) 3: BRAKE PADAL (R) 4: ACCELATOR PEDAL 5: BRAKE PEDAL CONNECTOR • • • 8050 OPERATORS MANUAL (122011).indd 69 1/10/2012 9:36:40 PM...

  • Page 70: Clutch Pedal

    • • • 8050 OPERATORS MANUAL (122011).indd 70 1/10/2012 9:36:40 PM...

  • Page 71: Acceleration Pedal

    FUNCTIONS 3. ACCELATOR PEDAL It is used to make the engine run faster or slower. It is usually used when driving on a road. • • • 8050 OPERATORS MANUAL (122011).indd 71 1/10/2012 9:36:40 PM...

  • Page 72: Lever Operation (R)

    2: MAIN GEAR SHIFT LEVER 3: RANGE GEAR SHIFT LEVER 4: ACCELATOR LEVER 5: REAR REMOTE CONTOL LEVER (I,II,III) 6: 3PT CONTROL LEVER 7: PTO ON-OFF SWITCH 8: PTO SELECTION SWITCH • • • 8050 OPERATORS MANUAL (122011).indd 72 1/10/2012 9:36:40 PM...

  • Page 73: Mid Remote Valve Joystick

    Bucket will move up when pushed to the left and move down when pushed to the right. Joystick lever must be locked when driving while loader is lifted. Otherwise it may cause accident. • • • 8050 OPERATORS MANUAL (122011).indd 73 1/10/2012 9:36:40 PM...

  • Page 74: Range Gear Shift Lever

    12 levels of also used when working at a constant speed. gear shifting. When shifting the range gear, stop tractor and depress clutch pedal fully. • • • 8050 OPERATORS MANUAL (122011).indd 74 1/10/2012 9:36:41 PM...

  • Page 75: Rear Remote Control Lever

    LEVER# DETENT FRONT/REAR One-touch lifting up/down switch can lift up to the preset point set by upper limit control dial and move down to position of control lever. • • • 8050 OPERATORS MANUAL (122011).indd 75 1/10/2012 9:36:41 PM...

  • Page 76: Draft Control

    CCW and towing power lamp is turned off in gauge. if you turn the dial fully to the right, the hydraulic pressure to the device raising the implement is stopped. • • • 8050 OPERATORS MANUAL (122011).indd 76 1/10/2012 9:36:41 PM...

  • Page 77: Fender Remote Switch

    It is used for turning on or off the PTO clutch. * The engine does not start up, when the PTO ON/OFF switch is in [ON]. Put to [OFF] position for starting up the engine. • • • 8050 OPERATORS MANUAL (122011).indd 77 1/10/2012 9:36:41 PM...

  • Page 78: Pto Selection Switch

    PTO gets connected, and when the clutch pedal is de- pressed, PTO stops to rotate. When the clutch pedal is released, PTO rotates and PTO lamp lights on the instru- ment panel. • • • 8050 OPERATORS MANUAL (122011).indd 78 1/10/2012 9:36:41 PM...

  • Page 79: Lever Operation (L)

    FUNCTIONS LEVER OPERATION (L) 1: PTO SHIFT LEVER 2: PARK BRAKE LEVER • • • 8050 OPERATORS MANUAL (122011).indd 79 1/10/2012 9:36:41 PM...

  • Page 80: Pto Shift Lever

    To release the parking brake, ‘OFF’ position. step on the brake pedal and push the lever down. •Connect both brake pedals with the connector. PTO 1 540 RPM PTO 2 760 RPM • • • 8050 OPERATORS MANUAL (122011).indd 80 1/10/2012 9:36:41 PM...

  • Page 81: Others

    FUNCTIONS OTHERS 1: DIFFERENTIAL LOCK PEDAL 2: WORK LAMP SWITCH 3: WIPER SWITCH 4: SIDE WINDOW HANDLE 5: CIGARETTE LIGHTER / POWER OUTLET 6: CLIMATE CONTROL • • • 8050 OPERATORS MANUAL (122011).indd 81 1/10/2012 9:36:41 PM...

  • Page 82: Differential Lock Pedal

    To release the parking brake, wheels is idling. step on the brake pedal and push the lever down. •Connect both brake pedals with the connector. • • • 8050 OPERATORS MANUAL (122011).indd 82 1/10/2012 9:36:41 PM...

  • Page 83: Wiper Switch

    Lower buttons will only spout wash liquid. Wash liquid tank for cleaning is located on rear left side of cab exterior. • • • 8050 OPERATORS MANUAL (122011).indd 83 1/10/2012 9:36:42 PM...

  • Page 84: Side Window Handle

    4. SIDE WINDOW HANDLE Be aware of possible hand injury in hinge part and glass windows while opening and clos- ing. CAUTION It is used to open side window • • • 8050 OPERATORS MANUAL (122011).indd 84 1/10/2012 9:36:42 PM...

  • Page 85: Cigarette Lighter / Power Outlet

    With engine running or the main key switch is on, press in the cigarette lighter. The lighter can be pulled out as soon as it pops back out. • • • 8050 OPERATORS MANUAL (122011).indd 85 1/10/2012 9:36:42 PM...

  • Page 86: Climate Control

    6,7: TEMPERATURE : Red, to increase the temperature. Blue, to decrease the temperature. 8,9: AIR CIRCULATE CONTROL: Used to shift the supply of outside air and re-cir- culates the inside air • • • 8050 OPERATORS MANUAL (122011).indd 86 1/10/2012 9:36:42 PM...

  • Page 87: Seat

    Plus(+) for more support. Use the indicator for approximate weight setting. Release crank lever • • • 8050 OPERATORS MANUAL (122011).indd 87 1/10/2012 9:36:42 PM...

  • Page 88: Operation & Work

    OPERATION & WORK 8050 OPERATORS MANUAL (122011).indd 88 1/10/2012 9:36:42 PM...

  • Page 89: Checking Before Operation

    [Otherwise] There is a risk of injury due to implement falling. • If the fuel hoses are damaged, fuel will leak. Make sure that you check for any leakage. • • • 8050 OPERATORS MANUAL (122011).indd 89 1/10/2012 9:36:42 PM...
  • Page 90 • Damage to the tractor, or loosened bolts • Engine coolant level, leakage, or damage to the hose • Loosening of wheel bolts • Fuel quantity, fuel leaks, or damage to the fuel hose • • • 8050 OPERATORS MANUAL (122011).indd 90 1/10/2012 9:36:43 PM...
  • Page 91 OPERATIONS & WORK • Battery solution level • Cooling fan belt tension, damage • Air cleaner • Dust or straw on the radiator grill or the engine • • • 8050 OPERATORS MANUAL (122011).indd 91 1/10/2012 9:36:43 PM...
  • Page 92 Condition of R pins in each part • Loosening of the bolts holding the blade • Quantity of oil in each part. For more details, please refer to the implement manufacturer’s instructions. • • • 8050 OPERATORS MANUAL (122011).indd 92 1/10/2012 9:36:43 PM...
  • Page 93 Check on the driver seat. • Operational condition and free play of the clutch pedal • Operational condition and free play of the brake (0.2~0.4in) • Free play of the steering wheel (0.8~2.0in) • • • 8050 OPERATORS MANUAL (122011).indd 93 1/10/2012 9:36:44 PM...
  • Page 94 OPERATIONS & WORK f) Start the engine. • Operation of lamps and gauges • Abnormal noise from the engine • Color of the exhaust gas • • • 8050 OPERATORS MANUAL (122011).indd 94 1/10/2012 9:36:44 PM...
  • Page 95 4. Reduce the speed while driving on a rough road or a slope. 5. At the first 50th hour, carry out inspections of each part and replace the engine oil. • • • 8050 OPERATORS MANUAL (122011).indd 95 1/10/2012 9:36:45 PM...

  • Page 96: Starting/Stopping The Engine

    The exhaust gas can cause intoxication and trol lever is in the lowest position. can lead to fatal consequences. [Otherwise] CAUTION Implement might rise quickly and there is a risk of injury or machinery breakdown. • • • 8050 OPERATORS MANUAL (122011).indd 96 1/10/2012 9:36:45 PM...

  • Page 97: To Start The Engine

    Implement might rise quickly and there is a risk of injury or machinery breakdown Check the safety around the tractor and start to move slowly. . [Otherwise] WARNING There is a risk of injury. • • • 8050 OPERATORS MANUAL (122011).indd 97 1/10/2012 9:36:45 PM...
  • Page 98 Increase the engine to about 1,500rpm and warm it up for about five minutes without a load. e) Main shift lever / range shift lever into “NEUTRAL” position. • • • 8050 OPERATORS MANUAL (122011).indd 98 1/10/2012 9:36:46 PM...

  • Page 99: To Stop The Engine

    “N”, and block the tires. WARNING [Otherwise] The tractor may move and cause an acci- dent. ALWAYS SET THE PARKING BRAKE • • • 8050 OPERATORS MANUAL (122011).indd 99 1/10/2012 9:36:46 PM...

  • Page 100: Driving On The Road

    When making a turn, turn in the direction indicator lamp to inform other vehicles of your intention. • Pay particular cautions to narrow farm roads, slopes, and grassy shoulders, and reduce the speed. • • • 8050 OPERATORS MANUAL (122011).indd 100 1/10/2012 9:36:46 PM...

  • Page 101: Driving On The Slope

    You may shift the gear when you are no longer on the slope. If you stop on a slope, apply the parking brake. Other- wise, you may be exposed to a risk of accident. • • • 8050 OPERATORS MANUAL (122011).indd 101 1/10/2012 9:36:47 PM...

  • Page 102: Entering And Leaving The Pavement

    Enter or leave the pavement in a perpendicular direction. When climbing onto the pavement, lower the implement to achieve a lower center of gravity. Once all wheels of the tractor are on the pavement, raise the implement. • • • 8050 OPERATORS MANUAL (122011).indd 102 1/10/2012 9:36:47 PM...

  • Page 103: Turning On The Pavement

    Make sure to keep the implement in the up position when making a turn. • • • 8050 OPERATORS MANUAL (122011).indd 103 1/10/2012 9:36:47 PM...

  • Page 104: Differential Gear Lock

    Driving will be unstable and the tractor may cause an accident Depressing the differential gear lock pedal will make both rear wheels roll at the same speed. Releasing the pedal will automatically unlock the differential gear. • • • 8050 OPERATORS MANUAL (122011).indd 104 1/10/2012 9:36:47 PM...

  • Page 105: Tractor Loading / Unloading

    Fasten the tractor to the truck securely There is a danger that the tractor may turn with rope. over. [Otherwise] The tractor may fall off the truck and cause an accident. • • • 8050 OPERATORS MANUAL (122011).indd 105 1/10/2012 9:36:47 PM...

  • Page 106: Installing 3Point Link

    Connect Check chain to bracket & Lift link mounting hole and adjust length. Refer to instruction of implement for adjusting swing clearance. 1 : LIFT LINK 2: LOWER LINK 3: CENTER LINK 4: STABILIZER LINK • • • 8050 OPERATORS MANUAL (122011).indd 106 1/10/2012 9:36:48 PM...
  • Page 107 Note: May be damage to the screw thread when center • The Position ‘B’ is standard. link is excessively, turned over the adjustment range. • The Position ‘C’ allows the maximum pressure. • • • 8050 OPERATORS MANUAL (122011).indd 107 1/10/2012 9:36:48 PM...
  • Page 108 Turn the A-lever clockwise to rise up lift links. On the contrary, turn the A-lever counter clockwise to lower down lift links. After adjusting, turn down the lever for lock- ing. CAUTION • • • 8050 OPERATORS MANUAL (122011).indd 108 1/10/2012 9:36:48 PM...

  • Page 109: Precautions For Connecting The Implement

    When adjusting the implement, apply the parking brake, switch off the engine, and confirm that the PTO lever is on the “N” position. • When towing something, make sure to use the draw- bar. • • • 8050 OPERATORS MANUAL (122011).indd 109 1/10/2012 9:36:48 PM...

  • Page 110: Adjusting Wheel Tread

    Pull the parking brake, block the front wheels, and raise the body with a jack to make the rear wheel lift from the ground. b) To make sure adjustments alternatively between the left and right wheel. • • • 8050 OPERATORS MANUAL (122011).indd 110 1/10/2012 9:36:48 PM...

  • Page 111: Power Steering

    • Do not steer the wheel unnecessarily, because steering the wheel without mov- ing will attribute to early wear of tires and rims. • • • 8050 OPERATORS MANUAL (122011).indd 111 1/10/2012 9:36:48 PM...

  • Page 112: Maintenance After Work

    MAINTENANCE AFTER WORK 8050 OPERATORS MANUAL (122011).indd 112 1/10/2012 9:36:48 PM...

  • Page 113: Maintenance After Work

    CAUTION There is a risk that you may be entangled in the tractor or get injured Avoid water on electrical parts whenever possible, as it will cause equipment breakdown. • • • 8050 OPERATORS MANUAL (122011).indd 113 1/10/2012 9:36:49 PM...

  • Page 114: Maintenance For Prolonged Storage

    • Replace the covers that have been de- tached for checking or maintenance. • • • 8050 OPERATORS MANUAL (122011).indd 114 1/10/2012 9:36:49 PM...
  • Page 115 When the battery is attached to the tractor, make sure to connect the (+) terminal first. [Precaution] The battery will be discharged even if it is not in use. Recharge it fully every 12 months. • • • 8050 OPERATORS MANUAL (122011).indd 115 1/10/2012 9:36:49 PM...
  • Page 116 (7) Cover the air cleaner, muffler, and engine oil inlet with plastic sheets to keep moisture away. (8) Keep the clutch pedal in a depressed position to avoid rust on the clutch. Maintain the air pressure in the tires. • • • 8050 OPERATORS MANUAL (122011).indd 116 1/10/2012 9:36:51 PM...
  • Page 117 MAINTENANCE AFTER WORK <MEMO> • • • 8050 OPERATORS MANUAL (122011).indd 117 1/10/2012 9:36:51 PM...

  • Page 118: Periodic Maintenance And Adjustment

    PERIODIC MAINTENANCE AND ADJUSTMENT 8050 OPERATORS MANUAL (122011).indd 118 1/10/2012 9:36:51 PM...

  • Page 119: Periodic Maintenance Schedule

    ○ ○ Electric cables ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Greasing ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • • • 8050 OPERATORS MANUAL (122011).indd 119 1/10/2012 9:36:51 PM...
  • Page 120 Inspection should be done every 50 hours. If the tractor is not used much, inspect every year. • Replace parts every two years regardless of running hours. • Replace the steering wheel hose every two years. • • • 8050 OPERATORS MANUAL (122011).indd 120 1/10/2012 9:36:51 PM...

  • Page 121: Oil, Grease, And Anti-Freeze Chart

    Note) Above listed fuel, oil and coolant table is only for Transmission Branson Origin Oil initial filling, and may be reduced at the time of replace. / Hyd oil Texaco TDH oil, 1893 Front axle oil SAE80W-90 • • • 8050 OPERATORS MANUAL (122011).indd 121 1/10/2012 9:36:51 PM...

  • Page 122: Checking And Changing Of Oil

    [Otherwise] DANGER There is a danger of fire. Do not change oil just after stopping the en- gine. [Otherwise] CAUTION There is a danger of getting burnt. • • • 8050 OPERATORS MANUAL (122011).indd 122 1/10/2012 9:36:51 PM...

  • Page 123: Engine Oil

    If oil is hot, there is a risk of getting burnt. [Precaution] Check the oil lever before the engine is started or after CAUTION the engine is cooled down. • • • 8050 OPERATORS MANUAL (122011).indd 123 1/10/2012 9:36:52 PM...
  • Page 124 Check the fluid level through the inspection window at the rear side of the transmission compartment. The level should be 1/3 above in upper window. If the fluid level is below proper lever, add fluid. • • • 8050 OPERATORS MANUAL (122011).indd 124 1/10/2012 9:36:52 PM...
  • Page 125 *Transmission oil can be used for the hydraulic system and for the power steering unit. * Make sure to use the genuine Branson transmission fluid. <DRAIN PLUG> Drain the oil when oil is warm but be careful.

  • Page 126: Front Axle Oil

    2. Rotate the wheels so oil level fill mark is parallel to the ground. 3. Remove plug (B) and check oil level look into the hole. • • • 8050 OPERATORS MANUAL (122011).indd 126 1/10/2012 9:36:52 PM...
  • Page 127 6 o’clock position, drain oil. 3. Rotate the wheels so oil level fill mark is parallel to the gound. 4. Install drain plug (A), (B) and (C). • • • 8050 OPERATORS MANUAL (122011).indd 127 1/10/2012 9:36:52 PM...

  • Page 128: Filters / Coolant Replacement

    (4) After the oil pressure warning lamp is turned off, check the oil level again. Add oil as necessary. • • • 8050 OPERATORS MANUAL (122011).indd 128 1/10/2012 9:36:52 PM...

  • Page 129: Transmission / Hyd Fluid

    (3) After changing the transmission fluid, start the engine to circulate the fluid and then stop the engine. Check the fluid level at dipstick on left axle housing and add fluid as necessary. • • • 8050 OPERATORS MANUAL (122011).indd 129 1/10/2012 9:36:52 PM...

  • Page 130: Coolant

    Hot water will splash and may cause burn in- jury. CHECKING Open the engine hood and see if the water lever in the reservoir is between the upper and lower limit. Add clean water as necessary. • • • 8050 OPERATORS MANUAL (122011).indd 130 1/10/2012 9:36:53 PM...
  • Page 131 (3) Replace the drain plug, add anti-freeze and fill the radiator with tap water. (4) Replace the radiator cap and run the engine to mix the anti-freeze and water. • • • 8050 OPERATORS MANUAL (122011).indd 131 1/10/2012 9:36:53 PM...
  • Page 132 • For correct mixture ratio, refer to the manufacturer’s instructions. • When refilling the coolant, add only tap water. • As anti-freeze expires in one year, replace the coolant every year. • • • 8050 OPERATORS MANUAL (122011).indd 132 1/10/2012 9:36:53 PM...

  • Page 133: Others

    In normal working environments, clean the air filter ev- ery 100 hours and replace it every 1,000 hours. If the running hours are shorter, replace the element after one year. • • • 8050 OPERATORS MANUAL (122011).indd 133 1/10/2012 9:36:53 PM...
  • Page 134 Pull up the radiator cleaner in the direction of arrow mark and unfold it upward and pull out upward. Remove straw and dust. Clean it before and after work. • • • 8050 OPERATORS MANUAL (122011).indd 134 1/10/2012 9:36:53 PM...

  • Page 135: Battery

    When connecting the battery cable, connect the (+) terminal first. When disconnecting the cable, disconnect the (-) terminal first. CAUTION [Otherwise] There is a risk of getting burnt due to shorting of the battery. • • • 8050 OPERATORS MANUAL (122011).indd 135 1/10/2012 9:36:53 PM...

  • Page 136: Parking Brake Lever

    2) Tighten fixing nuts of parking brake cable and fix them at position where clearance amount is 0.8~ 1 in [20- 25mm] from the end of parking brake lever. • • • 8050 OPERATORS MANUAL (122011).indd 136 1/10/2012 9:36:54 PM...

  • Page 137: Fuel Pipes And Hoses

    Replace the pipes and hoses every two years even though they are not damaged [Precaution] • When replacing the fuel hose, drain air. • • • 8050 OPERATORS MANUAL (122011).indd 137 1/10/2012 9:36:54 PM...

  • Page 138: Electrical Cables

    Damaged cables must be repaired by an au- thorized dealer. Arrange for periodic mainte- nance for cables every 50 hours or once a year even thought the cables are not dam- aged. • • • 8050 OPERATORS MANUAL (122011).indd 138 1/10/2012 9:36:54 PM...

  • Page 139: Greasing

    Apply grease every 50 hours. Check the relevant parts before starting work everyday and add grease as nec- essary. After working on wet areas, make sure to apply grease to the tractor. • • • 8050 OPERATORS MANUAL (122011).indd 139 1/10/2012 9:36:54 PM...

  • Page 140: Steering Wheel

    If the free play is not normal, have it fixed at your nearest authorized dealer. • • • 8050 OPERATORS MANUAL (122011).indd 140 1/10/2012 9:36:54 PM...

  • Page 141: Brake

    4) Tighten the fixing nut. • In this case, the free play of the brake pedal is 0.2~0.4 in [5~10mm] • Adjust both of the brake pedals • • • 8050 OPERATORS MANUAL (122011).indd 141 1/10/2012 9:36:54 PM...
  • Page 142 Pump brake pedal until there is no bubble in fuel. 5) Tighten opening bolt and take out tube once air re- moval is finished. (Do the same for both left and right) • • • 8050 OPERATORS MANUAL (122011).indd 142 1/10/2012 9:36:54 PM...

  • Page 143: Fan Belt

    New belts must be inspected after 50 hours of use. • • • 8050 OPERATORS MANUAL (122011).indd 143 1/10/2012 9:36:55 PM...

  • Page 144: Air Compressor Belt

    When it is not sagging enough, adjust tension by using adjusting bolt at the front of compressor. Change the belt when tension cannot be adjusted even when the bolt is tightened as much as possible. • • • 8050 OPERATORS MANUAL (122011).indd 144 1/10/2012 9:36:55 PM...

  • Page 145: Toe-In

    Tighten the nuts when the toe-in is 0.16 ~ 0.3 in[4-8mm]. • Left and right adjustment of screw length must be same. • • • 8050 OPERATORS MANUAL (122011).indd 145 1/10/2012 9:36:55 PM...
  • Page 146 1. Loosen the lock nut (B) and adjust stop bolt (C). 2. Tighten stop bolt retaining lock nut (A) to 92 lb-ft. 3. Repeat above step for the other side. • • • 8050 OPERATORS MANUAL (122011).indd 146 1/10/2012 9:36:55 PM...

  • Page 147: Fuse And Fusible Link

    , if plastic coating is discolored when it is cut off, it should be inspected by a authorized dealer. If the fuse burns immediately after being replaced, it must be checked by the authorized dealer. • • • 8050 OPERATORS MANUAL (122011).indd 147 1/10/2012 9:36:55 PM...

  • Page 148: Color Of Exhaust Gas

    Blue – burning of engine oil If the color of the exhaust gas remains black or white dur- ing operation, have the tractor inspected at your nearest authorized dealer. • • • 8050 OPERATORS MANUAL (122011).indd 148 1/10/2012 9:36:56 PM...
  • Page 149 PERIODIC MAINTENANCE & ADJUSTMENT <MEMO> • • • 8050 OPERATORS MANUAL (122011).indd 149 1/10/2012 9:36:56 PM...

  • Page 150: Troubleshooting

    TROUBLESHOOTING 8050 OPERATORS MANUAL (122011).indd 150 1/10/2012 9:36:56 PM...

  • Page 151: Engine

    Is the fuel mixed with air? Drain the air from the fuel. Does the engine run only when the reducer le- Charge the battery. ver is pulled? • • • 8050 OPERATORS MANUAL (122011).indd 151 1/10/2012 9:36:56 PM...
  • Page 152 Inspect the air cleaner weak. Is the nozzle stained with carbon? Contact the dealer for repair Is the compression force weak? Is the valve clearance adjusted properly? Is the injection timing bad? • • • 8050 OPERATORS MANUAL (122011).indd 152 1/10/2012 9:36:56 PM...
  • Page 153 Battery warning lamp is on Is the regulator (current limit) defective? Contact dealer for repair during operation. Is the fan belt slack or damaged? Adjust or replace the fan belt • • • 8050 OPERATORS MANUAL (122011).indd 153 1/10/2012 9:36:56 PM...

  • Page 154: Clutch & Brake

    The brake pedal squeaks Is the brake pedal return spring damaged? Replace the spring and does not return well Is each part well greased? Remove the rust and apply grease. • • • 8050 OPERATORS MANUAL (122011).indd 154 1/10/2012 9:36:56 PM...

  • Page 155: Hydraulic System

    Is the cylinder damaged? Consult the dealer for repair. Is the position control lever on the shallowest Move the position control lever to the releas- position? ing direction. • • • 8050 OPERATORS MANUAL (122011).indd 155 1/10/2012 9:36:56 PM...

  • Page 156: Electrical System

    Is the battery discharged? Charge the battery. The horn does not sound. Is the fuse burnt out? Replace the fuse. Is the horn switch contact in bad condition? Inspect the horn switch. • • • 8050 OPERATORS MANUAL (122011).indd 156 1/10/2012 9:36:56 PM...
  • Page 157 TROUBLESHOOTING <MEMO> • • • 8050 OPERATORS MANUAL (122011).indd 157 1/10/2012 9:36:56 PM...

  • Page 158: Specifications

    SPECIFICATIONS 8050 OPERATORS MANUAL (122011).indd 158 1/10/2012 9:36:57 PM...
  • Page 159 SPECIFICATION Specifications are subject to change without notice. Contact your local Branson dealer for more information. Items Specificaiton Drive System 4 Wheel Drive Overall Length in [mm] 157 [3,980] Overall Width in [mm] 76 [1,920] Overall Height in [mm] 106 [2,680]...
  • Page 160 3.85 x 4.44 [98 x 113] Displacement cu.in[cc] 208 [3409] Tyep of air cleaner Dry, Double Filter Elements Fuel tank Capacity gal[L] 31.7 [120] Electronic Alternator Amps Battery Volt Steering Hydrostatic Clutch Multi, Wet • • • 8050 OPERATORS MANUAL (122011).indd 160 1/10/2012 9:36:57 PM...
  • Page 161 Electric over hydraulic control (position, draft & mixed) 3 point hitch link Telescopic lower link / Telescopic stabilizers Hydraulic System Category Category II Pump Flow Steering 8 GPM (14cc/rev) @ 2500 rpm Main 14.5 GPM (22cc/rev) • • • 8050 OPERATORS MANUAL (122011).indd 161 1/10/2012 9:36:57 PM...
  • Page 162 SPECIFICATION <MEMO> • • • 8050 OPERATORS MANUAL (122011).indd 162 1/10/2012 9:36:57 PM...
  • Page 163 Branson Machinery LLC 2100 Cedartown hwy Rome, GA, 30161 Tel: 877-734-2022 Fax : 877-734-0637 www.bransontractor.com Nov, 2011 8050 OPERATORS MANUAL (122011).indd 163 1/10/2012 9:36:57 PM...

Table of Contents