Parts For Hydraulic System - Branson 00 series Operator's Manual

C. PART FOR HYDRAULIC SYSTEM
1. Position Control Lever
Confirm that no one or a foot is
under
operating the system. Otherwise,
there is a risk of injury.
When lowering the implement, set the position
control lever, and the implement will go down to the
set position.
It is used to keep the implement constantly at a
certain position. When the lift lamp is on, the
implement cannot be lowered with position control
lever. A stopper is used to fix the position control
lever in the "UP" position while driving on a road.
2. Hydraulic Stop/Slow Return Valve
It is used to regulate the lowering speed of the work
unit (slow return function). Also, if you wind the
valve fully to the right, the hydraulic pressure to the
device raising the work unit is stopped.
the implement
- 36 -
before