Branson 00 series Operator's Manual page 34

4. PTO Lever
Observe
designated on the work unit.
Otherwise, the work unit may be
damaged and cause an accident.
The revolution of the PTO shaft can be shifted in
st
two levels.(1 Rear 540rpm : 2
Mid 2500 rpm) When shifting level, press clutch
pedal deeply.
* Mid PTO
The mid PTO is available for Branson approved
implements
5. Brake pedal
Make sure to connect the brake
pedals with the connector when
driving on a road.
[Otherwise]
There is a risk of abrupt turning or overturning due
to one-sided braking. Brake pedals are independent
of each other and can be used for making a small
turn on the pavement. Depressing the brake pedal
on the side to which to make a turn, the rear wheel
on that side is stopped and the tractor can make a
small turn.
the PTO speed
nd
Rear 960rpm -
- 34 -