Section 2 -
Digital cable access
Record: This option allows you to decide whether terminal should record every episode or only prime time, hence discarding
WARNING: This option works only with series that have a specific description for each episode on the TV guide. This option is
not functional if the series has a single general description for every episodes.
Save: This option manages how many episodes of a single series will be stored at once on the hard drive. For example, setting
it on 3 means the terminal will automatically erase the oldest episode when there are more than 3. This prevents unnecessary
overload of the hard drive. When recording all episodes, hard drive stores episodes without deleting any of them.
Save until: This option protects recordings from being
unintentionally deleted. When set on Space is needed, terminal
will erase an episode of this series as the hard drives reaches 80%
of its capacity to free disk space. When set on I delete, terminal
will not delete episodes from this series when hard drive reaches
80% of its capacity.
Record programs on: This option allows you to record episodes
only on the channel it was set up to or on any channel the series
might be aired.
Start/Stop recording: Sets recording start/stop at the exact time
or a few minutes before and after scheduled time.
WARNING: Recordings starting minutes before scheduled
broadcast must not conflict with other recordings set on the tuner.
Time frame recording
This option allows recording according to channel and time frame criteria,
regardless of specific programs. This proceeding allows to record up to 24
hours at a time of a specific time frame.
1. Press MENU on the remote;
2. Select DVR, then Set a recording;
3. Select the start, and end times and day and press Continue;
4. Select a channel from the channel list;
5. Press Record, and then Confirm or View recording settings
for additional options.
DCX user guide