Section 2 -
With your PVR, you can record your favourite shows, rewind or pause live TV.
Live TV recording
Thanks to its 2 tuners the terminal allows you to simultaneously record live content from 2 channels.
These tuners automatically store up 2 hours of standard definition content and half an hour of high definition. This allows you to
rewind and pause TV from the moment you tuned in. When you switch channels, information stored from the preceding channel
Located on the bottom of the screen, the status allows control of content stored in the terminal buffer memory. When time bar is
entirely green, 2 hours of SD content is stored (30 minutes of HD content). Time bar fills up further as tuner is set on the same
channel. For example, if terminal is set for 30 minutes on the same channel, you can rewind up to 30 minutes on the time bar,
that is, from the time the tuner was set on this channel.
You can switch between both tuners with the SWAP button of the remote control. When pausing the first tuner and swapping
to the other one, the first tuner will continue storing information.
If different shows have been stored, the terminal will assign them each a different colour. The ongoing show is always the one
with the green time bar.
You can save stored content by pressing REC and recording it on your terminal. An ongoing show that is fully stored on the time
bar will be recorded in full. An ongoing show that isn't stored from the beginning will not be recorded in full.
Digital cable access
Live or recorded TV viewing control is similar as with DVD player.
The PAUSE button puts viewing on hold; PLAY button resumes
viewing, while the STOP button ceases viewing altogether. You
may also fast forward or rewind recordings with FFWD and REW
(press up to 4 times to increase speed). Combine FFWD and REW
buttons with PAUSE for slower motion.
DCX user guide