Electricity Supply - E.C.A. Confeo Premix CP 24 HST Installation And User's Operating Instructions

Electricity Supply

Electrical installation should be made according to the national and local instructions.
The boiler must be earthed and a standard 230 V AC - 50 Hz supply is required.
WARNING: Disconnect power supply to prevent electrical shock before connecting
WARNING: If the supply cord is damaged, it must be replaced by a special cord or
Room Thermostat Connection (Optional)
1
It is possible to use one of the 2 different type of room thermostats together with your appliance
optionally, for providing temperature control of the system.
 CM707 CHRONOTHERM
Programmable digital
room thermostat (7006901313)
→ 7-day program
- Room thermostat (number 1) connection is seen in the wiring diagram (fig.1).
- Disconnect the bridge in the connector (number 1 – X1A).
- Connect the room thermostat connections to the connector.
the electricity supply.
assembly available from the manufacturer or its service agent
 Room thermostat (7006901312)
→ a simple room thermostat (+10
fig.20
0 0
C ... +30 C)
29