Safety Instructions; Recycling Kramer Products; Quick Start - Kramer VM-114H2C User Manual

• Avoid interference from neighboring electrical appliances that may
adversely influence signal quality
• Position your Kramer VM-114H2C away from moisture, excessive sunlight
and dust
!
2.2

Safety Instructions

!
2.3

Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC
aims to reduce the amount of WEEE sent for disposal to landfill or incineration by
requiring it to be collected and recycled. To comply with the WEEE Directive,
Kramer Electronics has made arrangements with the European Advanced
Recycling Network (EARN) and will cover any costs of treatment, recycling and
recovery of waste Kramer Electronics branded equipment on arrival at the EARN
facility. For details of Kramer's recycling arrangements in your particular country
go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.
2.4

Quick Start

This quick start chart summarizes the basic setup and operation steps of the
VM-114H2C.
2
This equipment is to be used only inside a building. It may be
connected only to other equipment that is installed inside a building.
Caution: No operator serviceable parts inside the unit
Warning: Use only the Kramer Electronics input power wall
adapter that is provided with the
Warning: Disconnect the power and unplug the unit from the wall
before installing
Getting Started
unit.
KRAMER: SIMPLE CREATIVE TECHNOLOGY