Operating The Vm-114H2C; Connecting The Vm-114H2C; Figure 3: Connecting The Vm-114H2C - Kramer VM-114H2C User Manual

5

Operating the VM-114H2C

This section describes how to:
• Connect the VM-114H2C (see
• Acquire an EDID (see
5.1

Connecting the VM-114H2C

To connect
1. Connect the HDMI source (for example, a DVD player) to the IN 1 (HDMI)
connector.
1 Switch off the power on each device before connecting it to your VM-114H2C After connecting your VM-114H2C, switch on its
power and then switch on the power on each device
2 The power adapter is not shown
8
Operating the VM-114H2C
Section

Figure 3: Connecting the VM-114H2C

1
the VM-114H2C as illustrated
Section 5.1)
5.2).
2
in the example in
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Figure 3 :