Configuring Alarm Inputs - HIKVISION DS-9000-ST Series User Manual

DS-7700NI-SP/9000/9600 Series HDVR/NVR User's Manual
8. Select the Apply button to save the motion detection settings and select OK to return to
the previous menu. Selecting the Cancel button without clicking Apply or OK will quit out
of the menu without saving settings.

Configuring Alarm Inputs

Certain actions can also be performed if an alarm input is triggered. To setup trigger actions:
1. Enter the Trigger menu, shown in Figure 136 by going to Menu > Recording
Configuration > Trigger.
2. Select the Alarm Input tab.
3. Select the Alarm Input No. in the dropdown list.
4. Edit the Alarm Name.
5. Select the trigger Type for the external alarm input device. N.O means Normal Open.
N.C means Normal Close. These two types can be selected.
6. Check the Enable Alarm Input checkbox to enable the selected alarm input. Uncheck the
checkbox to disable alarm input.
7. Click Handing Set to pop-up the Handing menu, as shown in Figure 137.
Figure 136 Trigger Settings Menu
121