Customizing Ptz Presets, Patterns And Patrols - HIKVISION DS-9000-ST Series User Manual

DS-7700NI-SP/9000/9600 Series HDVR/NVR User's Manual
3. Select the camera to test in the Camera dropdown list.
4. Using the Directional buttons and other PTZ control buttons (Zoom +/-, Focus +/-, Iris +/-,
the speed of the PTZ movement), test the functionality of the PTZ camera. If PTZ
camera and protocol supports it, you may also click the Auto-Scan button to test its
function. PTZ controls buttons are shown in Figure 130.
5. If PTZ camera is not working properly, make sure PTZ is connected and configured with
the correct settings under the General tab.

Customizing PTZ Presets, Patterns and Patrols

Your DVR allows you to customize presets, patterns and patrols for a connected PTZ camera. A
PTZ camera must first be configured before PTZ presets, patterns and patrols can be
customized (See Configuring Basic PTZ Settings).
To customize PTZ presets:
1. Enter the PTZ menu by going to Menu > Cameras Setup > PTZ.
2. Select the More Settings tab, as shown in Figure 129.
3. Select Save Preset and move the camera to the desired position using the PTZ control
buttons.
Figure 129 More Settings of PTZ Configuration
Figure 130 PTZ Controls Button
116