Rs-232 Commands - A-Neuvideo ANI-PiP-41UHD Instruction Manual

OSD Menu Na vigation / RS-232 CommandS
Menu contents are as follows:
System
FW Version
(2) A total of four buttons on the IR Remote are used for audio setting on OSD menu
navigation, including A-IN, Mute, VOL-, VOL+.
Menu contents are as follows:
A-IN Audio Input
Mute Audio Mute
VOL-/
Audio Volume
VOL+

RS-232 CommandS

The product also supports RS-232 command control. Connect the RS-232 port of the
product to a PC with a 3-pin phoenix connector cable. Then, open a Serial Command tool
on PC to send ASCII commands to control the product.
The ASCII command list about the product is shown as below.
Serial port protocol. Baud rate: 115200 (default), 57600, 38400, 19200, 9600; Data bits: 8bit;
Stop bits:1; Check bit: 0
x - Parameter 1; y - Parameter 2; ! - Delimiter
Command
Code
System Setting
help!
r type!
r fw version!
Language
Baud rate
Reset
Function
Description
List all commands
Get device model
Get Firmware version
English
115200 115200,57600, 38400,19200, 9600
Reset Reset
Read only
WIN1, HDMI1, HDMI2, HDMI3,
WIN1
HDMI4
OFF ON, OFF
100 0..100
ASCII Commands
Example
help!
r type!
r fw version!
11
Feedback
4x1 HDMI Multiviewer
MCU FW version x.xx.xx
SCALER FW version x.xx.xx