Firmware Updating / System Diagram - A-Neuvideo ANI-MINI601HD Instruction Manual

FIRMWARE UPDATING / SYSTEM DIAGRAM

FIRMWARE UPDATING
The ANI-MINI601HD supports fi rmware fi eld-updating, by USB fl ash disk.
1. Copy the fi le "ANI-MINI601HD.bin" to a USB fl ash disk. (The "ANI-MINI601HD.bin" fi le is provided by A-NeuVideo engineering department)
2. Plug the USB fl ash disk to the ANI-MINI601HD USB port on the front panel.
3. Pressing and hold the "MENU" button for 15 seconds until the update OSD appears.
4. The ANI-MINI601HD will capture the new fi rmware from USB fl ash disk.
5. After update to the new fi rmware, reboot and send the command "0617%" to restore to factory settings.
6. Reboot ANI-MINI601HD again.
Notice: If sending the RS-232 command to restore factory setting is unsuccessful, please change the baud rate to 115200.
SYSTEM DIAGRAM
END OF DOCUMENT
13