Weighing With Tolerance Range - KERN AEJ-C Operating Instructions Manual

13.2 Weighing with tolerance range

For weighing with tolerance ranges you can enter individual upper and lower limits.
For tolerance controls such as dosaging, apportioning or sorting the scale will display
violated upper or lower limits and show the tolerance tag.
The symbol in the upper part of the display shows whether the load is within the two
tolerance limits.
The tolerance marker is only in operation during operating mode tolerance weighing;
it is otherwise not visible.
The tolerance marker provides the following information:
1
2
3
4
5
Thereby Bar graph and Tolerance display appear, set in the menu
menu point P2.2.4 INFORM to BARGRAF.
AEJ-C/AES-C/PLJ-C-BA-e-1514
Goods to be weighed below tolerance limit
Goods to be weighed within tolerance
range
Goods to be weighed above tolerance limit
Bar graph
Tolerance display
63