Quick Start Guide – Recording on a "Memory Stick"
Connecting the mains lead
Use the battery pack when using your camcorder outdoors (p. xx).
AC power adaptor (supplied)
Inserting a "Memory Stick"
Position the B mark on the "Memory Stick" as illustrated and insert a "Memory Stick" in
the "Memory Stick" slot as far as it can go.
"Memory Stick" slot
12
Open the DC
IN jack cover.
Connect the plug with its v mark facing up.
"Memory
Stick" access
lamp
NOTE
Do not shake or strike your camcorder because your camcorder is reading
the data from the "Memory Stick" or recording the data on the "Memory
Stick." Do not turn the power off, eject a "Memory Stick" or remove the
battery pack. Otherwise, the image data breakdown may occur.
This chapter introduces you to the basic
features to record on a "Memory Stick" of your
camcorder. See the page in parentheses "( )"
for more information.
While pressing PUSH, turn the grip to the
recording position, and hold your camcorder
through the wrist strap to prevent the camera
from dropping as illustrated.
(p. xx)
(p. xx)
Press the
"Memory Stick"
once lightly to
eject it.