Table of Contents
Advertisement
Program
For temperature sensitive glassware
CHINA +
and lightly soiled dishware.
CRYSTAL
Run-time: ~ 12 minutes*
120°F
(plus 10 minutes for optional drying)
Rapid program for continuously used
RAPID
dishes.**)
130°F
Powder detergent: Place detergent
directly on the right hand side of the
door interior, NOT in the detergent cup.
Run-time: ~ 10 minutes*
Quick program for lightly soiled
SHORT
dishware, e.g. party dishware or to
130°F
remove salt traces from the wash
cabinet after refilling salt.
Run-time: ~ 15 minutes*
(plus 10 minutes for optional drying)
Powder detergent dosage: 1 ½ tablespoons (20 grams) in the detergent
dispenser. Follow manufacturers instructions if they differ.
*) Run times dependent on incoming water pressure and temperatures
**) Important information for the "Rapid" program
At the end of the program, the final rinse water is not drained away. It is used for
the following "Rapid" program as wash water. If the operation is interrupted for a
longer time or another program is desired:
^ Select the program "DRAIN". The final rinse water is drained away.
X = Sections included in the program (with temperature/temperature holding time)
1)
Temperature or temperature holding time adjustment
(see "Programming special functions").
Important: To clean dishes with soiling it is recommended to program a
wash temperature of 140°F (60°C).
2)
To select an economy interim rinse see "Programming special functions".
3)
To select a second interim rinse see "Programming special functions".
When to use
Program guide
Program cycle
Pre-
Main
Interim
wash
wash
rinse
1)
1 2 3
1 2
X
X (X)
2)
X
(X)
X
Final
Drying
rinse
(Option.
1)
funct.)
3)
X
(X)
X **)
(X)
X
(X)
27
Hide quick links:
Advertisement
Table of Contents
