All electrical work must be
carried out by a suitably qualified
person in compliance with local and
national safety regulations.
A damaged power cord must only
be replaced with a genuine Miele
cord by a Miele Service Technician.
^ For technical data see the data plate
or wiring diagram supplied.
The machine must only be operated
with the voltage, frequency and fusing
shown on the data plate.
The data plate is located on the rear of
the machine and behind the service
panel on the upper left side.
The dishwasher can be converted
according to the supplied converting
diagram and wiring diagram.
The wiring diagram is located behind
the operating panel.
The conversion diagram is located
behind the service panel.
^ See also the supplied installation
THIS APPLIANCE MUST BE
Grounding the machine
A connection screw with the grounding
) is provided on the back of
the machine for grounding.
The G 7856 is available as two
a 240V version,
a 208V version.
To avoid machine damage, please
ensure proper outlet voltage prior to