Unpacking Your Finder - Flashforge Finder Quick Start Manual

Unpacking Your Finder

3
1. Place the packaging box on a clean
work surface.
4. Remove the tape on the bottom and
then remove the bag.
2. Open the box, grasp the two handles
and then lift your Finder out of the box.
5. On the top foam sheet, you can see one
Quick Start Guide, one 4GB USB stick,
three Allen wrenches (M1.5, 2.0 and 2.5)
and one screwdriver.
3. Remove the side protective foam
sheets, you will see the Finder in a
transparent bag.
6. Remove the top foam sheet.