Unpacking Your Finder - Flashforge FINDER User Manual

A.

Unpacking Your Finder

Congratulations on your purchase of the Flashforge Finder 3D printer! In
about 15 minutes, you will be ready to start making your first 3D object.
This section lays out the procedure for correctly removing the Finder
from its shipping box. The Finder contains delicate components, please
remember to handle with extra care and attention. Let's begin!
1. Place the color packaging box on a
clean work surface or the ground. Open
the box, grasp the two handles and lift
your Finder out of the box.
2. The Finder is wrapped by packaging
material. Next, we should remove the
packaging material.
Finder User Guide| www.ff3dp.com
7
7