Maintenance - Life Gear 27910 Owner's Manual

Round Knob
Adjusting the Seat Height
Loosen the Round Knob by turning counterclockwise direction until it can be pulled out.
Pull out the Round Knob and then slide the Seat Post up or down direction to the suitable
position. Lock the Seat Post in place by releasing the Round Knob and sliding the Seat
Post up or down slightly until the Round Knob "pops" down into the locked position. For
added safety, tighten the Round Knob in a clockwise direction.
NOTE: When adjusting the height of seat post, the maximum insert depth mark line
cannot higher than the edge of bushing.
Round Knob
Adjusting the Seat Forward or Back
Loosen the Round Knob by turning counterclockwise direction until it can be pulled out.
Pull out the Round Knob and then slide the Seat Sliding Tube forth or back direction to the
suitable position. Lock the Seat Sliding Tube in place by releasing the Round Knob and
sliding the Seat Sliding Tube forth or back slightly until the Round Knob "pops" down into the
locked position. For added safety, tighten the Round Knob in a clockwise direction.
NOTE: When adjusting the length of seat sliding tube, the maximum insert depth mark
line cannot over than the edge of bushing.

MAINTENANCE

Cleaning
The spinning bike can be cleaned with a soft cloth and mild detergent. Do not use
abrasives or solvents on plastic parts. Please wipe your perspiration off the bike after each
use. Please inspect all assembly bolts and pedals on the machine for proper tightness
every week.
Storage
Store the spinning bike in a clean and dry environment away from children.
11