Function - Jadever JWE User Manual

Ø When LCD display
M+
press
MR
EZ2-S、TDP-643.
Ø The LCD display shows
M+
– press
MR

function.

Ø The LCD display shows
M+
– press
MR
Un – beep sounds when load over pre-set value
In – beep sounds when load between pre-set values
no – beep sounds when load over pre-set value 1 or under pre-set
value 2
Lo – beep sounds when load under pre-set value
Remarks:
ZERO
Press key anytime when a function setting is completed.
+
This will save the setting and return the scale to normal weighing mode.
Recharge the battery:
When battery symbol appears on the LCD display, plug in AC power for
charging the battery, the indicator will turn red. The charge is complete, when
indicator turns into green, (It takes about 8 hours for charging).
to choose the external device i.e. : PC、TP、SH、AX、
key to enable (ON) or disable (OFF) the memory
key to select beep mode.
and follow by
.
8