Table of Contents
Advertisement
Mail To #1-5 – the receivers' e-mail addresses. The system can send the e-mails
originated from the triggered events to up to 5 different receivers. Please follow the Text
Input method described in
6.10.2 Advanced Network Setup
In Network Setup, press ENTER to call up Advanced Network Setup as shown when the
highlighted option is Adv..
The Advanced Network Setup allows the administrator to set advanced network parameters.
If the user is not familiar with network administration, please DO NOT modify the
items in this dialog.
The general operations are as below:
▲▼
Press these buttons to select the items.
ESC
Press this button to escape from this screen and return to Network Setup display. If the
Save dialog is shown, press ENTER to exit and save, ESC to exit without saving.
Following is a brief description for each item and its specific operations:
Control Port – the control port for remote access. The default value is 67. Please follow
the Text Input method described in
Data Port – the data port for remote access. The default value is 68. Please follow the
Text Input method described in
HTTP Port – the HTTP (web page) port for remote access. The default value is 80.
Please follow the Text Input method described in
WAP Picture quality – (this machine support cellular phone long range interview).
Please press +/-. The key changes initial value.
MAC Address – the DVR MAC Address
Note: If the Control Port or Data Port is not available or accessible during remote access,
the system will reset the ports to their default values, i.e. 67/68.
Section 4.1
to modify these items.
Section 4.1
Section 4.1
to modify this item.
52
to modify this item.
Section 4.1
to modify this item.
Advertisement
Table of Contents
