Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Comelit HDDVR004A
Summary of Contents for Comelit HDDVR004A
- Page 1 HD-SDI STAND-ALONE DVR, 4 / 8 / 16 CHANNELS ART. HDDVR004A / HDDVR008A / HDDVR016A Please read this manual thoroughly before use, and keep for future reference Via Don Arrigoni, 5 24020 Rovetta S.Lorenzo (Bergamo) http://www.comelitgroup.com export.department@comelit.it e-mail:...
-
Page 2: Safety Precautions
Safety Precautions Explanation of Graphical Symbols This symbol indicates the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. This symbol indicates the presence of uninsulated ”dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. - Page 3 These precautions must be followed for safety reasons. Warning Do not use if the unit emits smoke, strange sounds are heard or odor is emitted. Continued use may cause electrocution and/or fire. Immediately remove the power plug from the outlet. Once the unit stops emitting smoke, consult the dealership where this unit was purchased or factory shop for repairs.
- Page 4 In the event that a foreign object is inside the unit, turn off and unplug the unit. Consult the dealership where this unit was purchased or factory shop. Continued use may result in fire and/or electrocution. Do not place a container holding water or other liquids above the unit when it is connected to power.
- Page 5 Doing so may cause the unit to fall, be damaged and/or result in injury. Make sure the cables are connected properly. Connect and install the power cable and connection cable very carefully. Tripping over the cable may result in the unit capsizing or falling and cause injury. Do not place heavy objects on connected units.
- Page 6 . Areas where the unit will be exposed to constant vibration (in trains, cars, etc.) Cautionary points on condensation Droplets may form on the outside when very cold water is poured into a cup. In the same way, droplets may form around the internal components of his unit. This is called condensation. Do not use this unit if condensation has formed.
-
Page 7: Product Components
Product Components The package contains the main unit and its components as specified below. When you purchase the unit, Please check to ensure the components specified below are included. (for 4/8ch) DVR Set Mouse (for 16ch) Client Software CD / Remote Control / Quick Guide Battery... - Page 8 Mounting HDD (HDDVR004A / HDDVR008A) 1. Before installing, mounting brackets and 2. The HDD with the mounting brackets. screws onto HDD. 3. Install HDD with fixing screws onto the inside 4. Install HDD with fixing screws onto the of the system inside of the system 5.
- Page 9 Mounting HDD (HDDVR016A) 1. Mount the HDD into the mounting bracket as specified below. Insert the HDD bracket and mounting screw as specified below. 3. Connect the HDD SATA and HDD power cable as specified below. NOTE: the system has DATA ports like the above red box. It would be better when installing the first HDD to HDD1 port because the system recognizes the first HDD as a master HDD.
-
Page 10: Compatible Hdd Models
Compatible HDD Models Seagate ST32000641AS (Barracuda XT) 2 TB 7200 RPM 64 MB Seagate ST1000DM003 1 TB 7200 RPM 64 MB Seagate ST31000524AS (Barracuda 7200.12) 1 TB 7200 RPM 32 MB Seagate ST31000526SV (Surveillance) 1 TB 7200 RPM 32 MB Seagate ST31000524AS (Barracuda) 1 TB... -
Page 11: Booting The Dvr And Basic Time Setting
Storage Estimation Super High Standard Economy Hour(s) Hour(s) Hour(s) Hour(s) Capacity 250GB 23 Hours 1 Days 5 Hours 2 Days 10 Hours 4 Days 20 Hours 500GB 2 Days 2 Days 13 Hours 5 Days 1 Hours 10 Days 2 Hours 4 Days 3 Hours 5 Days 4 Hours 10Days 8 Hours... - Page 12 Go to SETUP>SYSTEM>SET DATE & TIME Select DAYLIGHT SAVING.
-
Page 13: Setting Ntp (Network Time Protocol)
Setting NTP (Network Time Protocol) 1. When the DVR is connected with internet and the DVR need to be syncronized with NTP (Network Time Protocol), set SETUP>SYSTEM>NTP ON. 2. Select proper TIME ZONE time. NOTE: if you want the unit to automatically synchronize the local time, the Time Zone must be properly set according to your local Time Zone. - Page 14 Specifications ITEM HDDVR004A HDDVR008A HDDVR016A Channels, 4/8/16 CH HD-SDI (1080p@25/30, 1080p@50/60, Input Input Level 720p@25/30/50/60 Auto Detection) Video HDMI 1 HDMI (Max 1920x1080p@60 and Various Resolution) Output 1 VGA (Max 1920x1080p@60 and Various Resolution) Input 4/8/16 CH RCA Audio Output...
- Page 15 PTZ & Keyboard control 1 RS-485 1 RS-485 Termination Dynamic DNS Yes (Free DDNS) Network Dual Encoding for 640x360 60fps (HD TBD) Network Web viewer (1:1) Network Live, Search, Backup, PTZF Cam Control, Remote Setup, UMS Single (1:1) Access Remote Upgrade UMS Multi (1:n) Useful Features DLS &...
-
Page 16: Table Of Contents
Table of Contents Name, Function and Connection..................18 1-1. Front Panel...........................18 1-2. Rear Panel ...........................23 1-3. Remote control ..........................24 Setting up the DVR ......................25 2-1. Setup – Main Screen ........................25 2-2. Setup – Display Mode ........................28 2-3. Setup – Recording Mode ......................29 2-3-1. - Page 17 6. Back up ..........................59 6-1. Video or still image backup onto USB flash memory..............59 6-2. Transferring still images or video from the ARCHIVE list ..............60 6-3. Playback of Backup Video ......................60 7. Upgrading Firmware ......................61 8. Network access using the Exclusive network viewer, UMS single......... 67 8-1.
-
Page 18: Name, Function And Connection
NETWORK Indicating that when Network client connects through the network. BACKUP Indicating that USB or DVD-RW storage device is stored images or video. Table2.1.1. Indication lamps for HDDVR004A / HDDVR008A Table 2.1.2. Front panel buttons for HDDVR016A Name Description POWER ON/ OFF Channel keys. - Page 19 Press to select audio mode such as SINGLE and MUTE. MUTE- All channels. SINGLE- Highlighted channel only. Jump/Step backward. In playback mode, the playback position moves 60 seconds backward. Press to fast forward the footage in playback mode. Press to enable/disable ALARM operation. Jump/Step forward.
- Page 20 It is also used as the number 1 when entering password. ▶(RIGHT) Press to move right or to change the values in Setup mode. It is also used as the number 2 when entering password. ▼(DOWN) Press to move down the menu in Setup mode. It is also used as the number 3 when entering password.
- Page 21 Name Description POWER ON/ OFF Channel keys. For channel 10, press the 0 key. Press to rewind the footage in playback mode. Press to select audio mode such as SINGLE, MIX and MUTE. MUTE- All channels. SINGLE- Highlighted channel only. MIX- All channels.
- Page 22 Press to control Pan/Tilt/Zoom operations. Press to enter SETUP menu. Press to capture video in jpeg format in live or playback mode. ◀(LEFT) Press to move left or to change the values in Setup mode. It is also used as the number 4 when entering password. Press to move up the menu in Setup mode.
-
Page 23: Rear Panel
1-2. Rear Panel Figure 2.2.1. Rear Panel Table 2.2.1. Rear panel connections Connection Purpose connectors for video input. VIDEO IN HD-SDI 4/8/16 connectors for audio input. AUDIO IN In case of HDDVR016A, an audio cable is needed from ch 5 to ch 16. AUDIO OUT 1 connector for audio output. -
Page 24: Remote Control
1/2/4 connectors for alarm device. ALARM OUT Provide simple on/off switching by using relay (A, B) POWER 12 VDC for HDDVR004A / HDDVR008A, 280W SMPS for HDDVR016A Cooling FAN RS-485 termination switch for HDDVR008A / HDDVR016A. TERMINATE Switch ON: Termination. Switch OFF: No Termination 1-3. -
Page 25: Setting Up The Dvr
2. Setting up the DVR The following sections detail the initial setup of a DVR. 2-1. Setup – Main Screen To enter the setup menu, select MENU and SETUP on the screen using the mouse or press the SETUP button on the front panel. Then select a user type. User can select one of user types (ADMIN, USER1, ◀... - Page 26 Use the Virtual Keyboard when you use front key and mouse. The factory default password is 1111. It is highly recommended to assign a new password to protect the system. User can assign a new password in SECURITY setup menu. CONTROL BAR AUTO HIDE: Set to hide automatically or display continuously a control bar on the bottom side in a Live mode.
- Page 27 – KEY TONE – REMOTE CONTROL ID – SENSOR TYPE STORAGE – OVERWRITE – DISK FORMAT – DISK INFO – RECORDING LIMIT RECORDING LIMIT DAYS – S.M.A.R.T SYSTEM – DVR-ID – DESCRIPTION – LANGUAGE – DATE FORMAT – SET DATE & TIME –...
-
Page 28: Setup - Display Mode
– CUSTOMER SETTINGS 2-2. Setup – Display Mode Press the SETUP button and enter the password. The setup menu is displayed as picture below. Select DISPLAY icon and press SEL button to enter the setup menu item. Navigate through the menu items using ◀... -
Page 29: Setup - Recording Mode
2-3. Setup – Recording Mode Press the SETUP button and enter the password. The setup menu is displayed as picture below. Select RECORD icon and press SEL button to enter the setup menu item. Navigate through the menu items using ◀... - Page 30 This compact DVR has a record mode. Maximum recording frame rate per channel is different by the record mode as follows. MODE Record Input Resolution Maximum Recording Frame rate per CH mode HDDVR004A HDDVR008A HDDVR016A 720 mode 1280x720 12fps 12fps 12fps 720/1080 (1280x720)
-
Page 31: Recording Schedules
QUALITY Select the recording quality for the specified channel. Options are: Level 1 (Low), 2, 3, 4 and 5 (High) RECORDING Assign the recording mode for each channel. Options are: Continuous, By Motion, By Sensor, By Schedule or Disable. ◀ ▲ SENSOR Enable setting up to 4 sensors for the specified channel using the control button ( ▶... -
Page 32: Setup - Device Mode
Figure 2.3.2. Schedule recording setup screen C: CONTINUOUS recording, when you select the color will change to Blue Color M: MOTION recording, when you select the color will change to Yellow Color S: SENSOR recording, when you select the color will change to Red Color -: Does not record [ALL]: Move the cursor to ALL and select a recording mode C,M or S using the SEL button to set the same setting for every day. - Page 33 Figure 2.4.1. Device mode setup screen Table 2.4.1. Menu items in Device Setup screen Item Description ALARM OUT Set the sensor, motion, and video loss for each alarm. CONTROLLER & PTZ Set the Controller and PTZ camera speed, number, type and CHANNEL Select specified channel for motion zone setup.
-
Page 34: Alarm-Out
Item Description ALARM OUT Select an alarm out number. Available NO: HDDVR004A (1), HDDVR008A (2), HDDVR016A (4) SENSOR IN Enable Alarm Out by Sensor up to 4/8/16 Inputs. MOTION ON Enable Alarm Out by Camera Motion up to 4 cameras. -
Page 35: Motion Zone Setup
Figure 2.4.3. Controller and PTZ Control Setup Screen Note: for speed dome cameras that support RS-485, connect them directly to the RS-485 port. If the camera is controlled with RS-232C, use an RS-485 to RS-232C signal converter. On the Controller and PTZ control setup screen, you can select or set the protocol type of the camera that is the same as the one installed on the site. -
Page 36: Setup - Storage Mode
Figure 2.4.4. Motion Zone selection screen 2-5. Setup – Storage Mode Press the SETUP button and enter the password. The setup menu is displayed as picture below. Select STORAGE icon and press SEL button to enter the setup menu item. Navigate through the menu items ◀... - Page 37 Table 2.5.1. Menu items in STORAGE Setup screen Item Description OVERWRITE When enabled, the DVR will continue recording and overwrite the oldest existing recorded data once the hard drive is full. When disabled, recording will stop once the hard drive is full. DISK FORMAT You will have an option YES or NO for the hard drive format.
-
Page 38: Setup - System Mode
Enable/disable recording limit. RECORDING LIMIT RECORDING Set the recording limit days.(1- 90 days) LIMIT DAYS The data will remove by the hour. S.M.A.R.T. Set the alarm and buzzer by setting HDD temperature limit. 2-6. Setup – System Mode Press the SETUP button and enter the password. The setup menu is displayed as picture below. Select... - Page 39 SYSTEM icon and press SEL button to enter the menu item. Navigate through the menu items using the ◀ ▲ ▶ ▼ ◀ ▲ ▶ ▼ control button ( ) and change the value of the menu item using the control button ( To return to setup menu screen, press the ESC button.
- Page 40 ◀ ▲ ▶ ▼ LANGUAGE Select the display language using the control button ( ). Once a language is selected, the display language changes. ◀ ▲ ▶ ▼ DATE FORMAT Select the date display format using the control button ( ).
- Page 41 of the daylight saving period. ◀ ▲ ▶ ▼ Select BEGIN or END using the control button ( ) and press the SEL button. ◀ ▲ ▶ ▼ Select the item using the control button ( ), select the ◀ ▲ ▶ ▼ setting value using the control button ( ) and press the ESC button to return to SET DATE &...
- Page 42 TRANSMISSION MODE: Sending an image only of the channel that triggered the alarm when an alarm event is triggered. IP NOTIFICATION: Enable/disable sending e-mail when the IP address of your DVR is changed. EVENT ALARM: Enable/disable sending e-mail reports on the channel that triggered the alarm when an alarm event is triggered.
-
Page 43: Setup - Security Mode
2-7. Setup – SECURITY Mode Press the SETUP button and enter the password. The setup menu is displayed as picture below. Select SECURITY icon and press SEL button to enter the setup menu item. Navigate through the menu items ◀ ▲ ▶ ▼ ◀... -
Page 44: Setup - Network Mode
Options are ADMIN, USER1, USER2 and USER3. ◀ ▲ ▶ ▼ Select USER PASSWORD using control button ( and press SEL ◀ ▲ ▶ ▼ button. Select user type using the control button ( ) and SEL button. Enter the current password and select OK. Enter the new password and select OK. Enter the same password again to confirm and select OK. - Page 45 Figure 2.8.1. NETWORK setup screen Table 2.8.1. Menu items in Network Setup screen Item Description PORT Port number (default: 5445) NETWORK AUDIO Port number (default: 5446) PORT WEB PORT Web Sever Port number (default: 80) NETWORK TYPE Select a type of network connection. Options are: DHCP and STATIC Note.
-
Page 46: Port, Network Audio Port And Web Port
“ON” mode, DDNS server name appears for domain registration. DDNS SERVER NAME: The DDNS sever name is bestddns.com. CAUTION: Do not change this sever name. If this is changed, the DDNS service cannot be available. DDNS INTERVAL: Set the connection interval (5-60minutes) NETWORK STREAM Set the value for network streaming. -
Page 47: Ddns
from IP sharer itself using “DMZ” function out of such sharer. Input IP set in DMZ on “IP” field and Gateway of ADSL modem on “Gateway” field. Similarly, for Subnet Mask, DNS address, input relevant values in IP sharer. Table 2.8.2. LAN Item Description The fixed IP address of the DVR unit. -
Page 48: Network Stream
If user wants to use other general-purpose DDNS Server, select a Sever 2. Then, user has to input the server name, ID and password using a virtual keyboard. 2-8-4. NETWORK STREAM User can set the Resolution, the frame rate and the quality for a network stream classified by channel. It is recommended that user should adjust each item to proper level to get the network service smoothly. -
Page 49: Quick Setup
Item Description SAVE SETUP User can save the current configuration (Setting values) of DVR to the TO A USB USB memory stick. Put the USB stick on the front panel and press SEL to start the saving process. User can upload the configuration of DVR to another DVR using the USB LOAD SETUP FROM A USB Memory stick. -
Page 50: Saving Setup
The QUICK SETUP has high priority than other setting values on RECORDING and NETWORK menu. The QUICK SETUP also cannot set to classified according to channel. Table 2.10.1. Quick Setup Item Description USE QUICK Select the Checkbox to use the Quick Setup. SETUP When user inputs the DESIRED DAYS to record, the system displays a recommended record mode, resolution, frame rate, quality and recording... - Page 51 Table 4.1.1. Status Indicator Icons in Live Viewing Screen Icon Description Click the power icon when you want to shut it off by mouse Click the LOCK icon when you want to lock and unlock the DVR by a mouse Click the SETUP icon on the screen using the mouse to see menu items.
-
Page 52: Search Screen
Indicates that lock activated, this icon will be back to black color when unlock. Audio mute. To set audio mute, press the Audio button on the front panel. Single audio display. To set audio single for highlighted channel only, press the Audio button on the front panel. Indicates that alarm is set. -
Page 53: Time-Line Search
Figure 4.2.1. Search Screen There are 7 ways of search menu such as TIMELINE, EVENT, GO TO FIRST TIME, GO TO LAST TIME, GO TO SPECIFIC TIME, ARCHIVE and LOG on the screen. 4-2-1. TIME-LINE Search The TIME-LINE search window is used to find the stored video by using the time line bar. When it clicks a Timeline menu, user can see a calendar which has recording data. -
Page 54: Go To First Time
Figure 4.2.2. Event Search screen When it clicks an Event menu, user can see a calendar which has recording data. Select a specific date and then user can see all data. Press a PLAY button to playback the data or a SAVE button to save the data at once after selecting a specific data. -
Page 55: Go To Specific Time
4-2-5. Go To Specific Time Figure 4.2.3. Go To Specific Time User can search for video data from a specific instance by setting the date and time in the Go To ◀ ▲ ▶ ▼ Specific Time menu. Use the mouse or the control button ( ) on the remote control to change the date and time value and press the PLAY button after setting. -
Page 56: Log Search
Figure 4.2.4. Archive Search Screen When it clicks an Archive menu, user can see a calendar which has recording data. Select a specific date and then user can see all data. When it presses a Display button, the still image or the first frame of the selected video is opened and user can save the data. -
Page 57: Play Mode
4-3. Play mode During playback of a recorded event, the mode changes from SEARCH to PLAY. While in PLAY mode, you may return to the SEARCH screen by pressing the X button on the status bar or the ESC button of a remote control. -
Page 58: Ptz Control
5. PTZ Control To control the PTZ functions of the camera, select PTZ menu on the screen using the mouse. Select the ◀ ▲ item you wish to control the PTZ camera and control them using the mouse or the control button ( ▶... -
Page 59: Back Up
User can set the preset number in the tour group of the OSD menu. NUMBER Avail ble only on the TOUR and PRESET menu. Press the ESC button to return to the main menu. 6. Back up 6-1. Video or still image backup onto USB flash memory Video or still image can be captured and archived onto the USB stick or hard drive while playing back recorded video. -
Page 60: Transferring Still Images Or Video From The Archive List
6-2. Transferring still images or video from the ARCHIVE list The stored data onto hard drive will be found in the ARCHIVE list in SEARCH window. User can back up still images or video into the storage device from the ARCHIVE list. 1. -
Page 61: Upgrading Firmware
- BACKUP DATA: NSF format video file and INDEX file for a title file of date and time - HD PLAYER: Exclusive video viewer. AVI format: It can be played back by Window Media Player™ or other media player that is compatible with AVI format video. - Page 62 1. Go to Config menu of Setup. 2. You can see the following message when pressing the software upgrade menu after putting the USB memory stick on the system. 3. You can see the following message when pressing the scan button. Please check the current firmware version and the firmware version which you want to upgrade.
- Page 63 4. You can see the following progressive message when pressing the upgrade button. 5. You can see the following message when finishing the upgrade. After upgrading, the system should be restarted. At that time, the USB memory stick has to be pulled out.
- Page 64 6. You could see the following warning message if you don’t pull out the USB memory stick. Remote Firmware Upgrade User can upgrade the firmware via Network as follows. 1. Go to the Remote Setup menu on the UMS Multi or Web Viewer.
- Page 65 2. Press the password for admin. Just admin is possible to connect to the remote setup menu. 3. Go to the Remote Upgrade menu. Then, you can see the current F/W version as follows. To upgrade a new F/W, insert the F/W in your PC and press the UPGRADE button. 4.
- Page 66 5. When finishing the upgrade, the network streaming would be connected again automatically and you can see the following screen. Please check the current F/W version if the upgrade is succeeded.
-
Page 67: Network Access Using The Exclusive Network Viewer, Ums Single
8. Network access using the Exclusive network viewer, UMS single The DVR provides a live remote monitoring feature. Remote monitoring requires installation of the network viewer on your PC. NOTICE In a high bandwidth network, a maximum of four users can access one DVR simultaneously. In a low bandwidth network it is recommended that only one user access the DVR at a time. -
Page 68: Live Monitoring Mode And Functions
4. Select the program folder and click 5. The setup status screen is displayed. “Next”. After the installation is completed, “UMS Client” icon is displayed on the desktop. 8-3. Live monitoring mode and functions. Button Function Description Displays the current date and time. DATE &... - Page 69 SEARCH Switches the live mode to search mode. DISPLAY MODE Select a channel and screen display mode. PAN/TILT/ZOOM/ FOCUS Control the PAN/TILT/ZOOM/FOCUS features on the remote camera. CAPTURE Capture a still image from live screen. PLAY/PAUSE Play/pause live video. ALARM The ON/OFF button of the alarm output of the DVR.
-
Page 70: Bi Directional Audio
QUAD/-screen display - Click the QUAD button to switch to quad-screen display Full screen display - Click the maximize button to display only screen and hidden the operation panel. Image capture of live screen Still-image of live screen can be captured and saved as BMP or JPEG file. 1. -
Page 71: Remote Search Mode And Functions
8-5. Remote search mode and functions Button Function Description DATE & TIME Displays the recording time of the data selected on the time bar at the bottom of the main user interface. DISCONNECT Disconnect network connection.. LIVE Switches the search mode to live mode. Capture a still image from live screen. - Page 72 PLAYBACK The playback buttons. BUTTON DISPLAY MODE Select a channel and screen display mode. Searching and playing video in the remote DVR Video recorded in the remote DVR or Video recorded on the PC can be searched and played back. 1.
-
Page 73: Pc System Configuration
Backup of video in the remote DVR Video recorded in the remote DVR cab be backed up on the PC HDD as AVI format. 1. Connect the network to the remote DVR and play the video recorded in the remote DVR. 2. - Page 74 Setting General Set the Security Option, Save Path, and Miscellaneous. Security Option: Set a password for security options. When you access any of the selected functions, you will need to enter the password. Save Path: Specify the location to record for backup and still image capture. Automatic reconnection: If a user selects this function, the client S/W will automatically try to connect to the previously connected IP address if the network connection is lost.
- Page 75 LOG – Select to save event log into ‘log file’. ICON – Select to display the event on live video. EVENT LIST – Select to show the event in the ‘Event List” window of live mode. Search and check the recorded log data. Setting Record Set the recording conditions and select channels to record.
-
Page 76: Network Access Using The Exclusive Network Viewer, Ums Multi
Select the local disk to use and the amount of disk space you want to allow the program to use for recording. 9. Network access using the Exclusive network viewer, UMS multi 9-1. Overview The UMS Multi-Client is a multiple site monitoring client software with; video, audio, and alarm signals from the DVRs over networks. -
Page 77: Minimum Pc Requirements
9-2. Minimum PC requirements Intel Pentium IV 2Ghz Memory 512MB or Higher is recommended. 128MB or Higher is recommended. Resolution 1024x768 Disk space Windows 2000, XP Professional, XP Home, Vista (some versions of Vista has problem in installation. Please contact your vendor for more information.) Network 10/100Base T Others... -
Page 78: Live Window
4. The setup status screen is displayed. 5. After the installation is completed, “UMS Multi Client” icon displays on the desktop screen. 9-4. Live Window When installation is completed, double click the “UMS Multi Client” icon on your desktop to start the program. -
Page 79: Main User Interface
9-4-1. Main user interface 9-4-2. Control buttons Button Description Click this icon to run a playback window to search and play videos that are recorded in local PC. LOCAL PLAYBACK Click this icon to run a playback window to search and play videos that are recorded in remote DVR. -
Page 80: Search And Playback Window
Click this icon to play/pause live video. PAUSE ALARM ON Enable or disable recording of live video to local disk which has RECORD ON set in setup menu. Use the volume control bar to set the audio level. AUDIO Use the micro phone volume control bar to set the micro phone level. -
Page 81: Main Control Panel
9-5-2. Main control panel Button Description Click this icon to run a playback window to search and play videos that are recorded in local PC. LOCAL PLAYBACK Click this icon to run a playback window to search and play videos that are recorded in remote DVR. REMOTE PLAYBACK Directory window shows site/sites that are pre-registered. - Page 82 Click this icon to setup configuration of UMS MULTI CLIENT. SETUP Click this icon to capture a still image. CAPTURE EVENT LIST Click this icon to set the beginning time for backup of the MARK IN recorded video in AVI format. Click this icon to set the ending time for backup of the recorded MARK OUT video in AVI format.
-
Page 83: Setup Of Ums Multi Client
To change a time line scale from 24 hours to 60 minutes or vise versa. The timeline shows recorded data in color on the bar. You can adjust the time line scale and move it to the time you wish to playback. -
Page 84: Event
You can also set the save path for capturing and backup. 9-6-1-2. Save Path: Specify the location to save captured still image for Capture and Backup data. 9-6-1-3. Miscellaneous Automatic reconnection: If a user selects this function, client S/W will automatically try to connect the finally connected IP address, after the network is disconnected. -
Page 85: Record
9-6-2-2. Archiving Event Log: Event log can be searched from selected time. 9-6-3. Record 9-6-3-1. Record setup: You can set the recording conditions for Always, Event, or Auto record. And you can also select target DVR/DVRs and channel/channels. When you set the recording condition to event, you can set event for motion or alarm with duration. -
Page 86: Osd
9-6-3-2. Record local storage setup: You can select the local disk to use and the amount of disk space you want to allow the program to use for recording. You can also select the option to overwrite data or stop recording when the maximum amount of disk space is full. -
Page 87: About
9-6-6. About “About” provides network client version information. 9-7. Remote Setup The menu settings for the DVR unit can be set from a PC, via network. Put the cursor of the mouse on the channel which is connected to the site and press the right. Then the following window is displayed. - Page 88 Then the setup window is displayed as follows to check the password for admin. Just admin is possible to connect to the remote setup menu. The specified menu screen is displayed on the upper side of the screen. Setting is basically the same as with the DVR menu setting. 9-7-1.
- Page 89 User can set the value on this remote setup page. After setting the value, please press the APPLY button. Then the value would be applied to the system without the system rebooting. RELOAD button is used when user want to bring the value in the system. 9-7-2.
- Page 90 9-7-3. DEVICE 9-7-4. STORAGE 9-7-5. SYSTEM...
- Page 91 9-7-6. NETWORK...
-
Page 92: Operation
9-7-7. UPGRADE Please refer to page 54 for the Remote Upgrade. 9-8. Operation 9-8-1. Addition, Delete, and modify of DVR sites 9-8-1-1. Addition of sites 1. Click SITE ADDITION button. And then the following window displays. o Model: User has to select surely a suitable type. SDVR series, H series DVR N series DVR, HD DVR IP Camera... - Page 93 o IP Address: Input IP address (Public IP address of a router that DVR is connected.) or Domain name that is registered at www.okddns.com (for Korea), www.ddnscenter.com (for USA) or www.bestddns.com (for other area including EU) o Port No.: Input port number of DVR. o ID: Input ID of DVR.
-
Page 94: Connect And Disconnect
2. Click NET FINDER button. And then the following window displays. 3. Click MODIFY button. And then the modified information is applied. 9-8-2. Connect and Disconnect 9-8-2-1. Connect 1. Select site/sites to connect from the directory window. - Page 95 2. Click CONNECT button, and then site/sites displays/display as connected. 9-8-2-2. Disconnect 1. Select site/sites to disconnect from the directory window. 2. Click DISCONNECT button, and then selected site/sites disconnected.
-
Page 96: Still-Image Capture During Live
9-8-3. Still-image capture during Live 1. Double-click a channel to capture from the display screen. (Otherwise all channels will be captured.). 2. Click CAPTURE button. And then a Capture window displays. 3. Set Save path, File Name, and File Format. And then click OK button. 4. -
Page 97: Recording Video On Local Pc During Live
9-8-4. Recording video on local PC during Live 1. Click SETUP button. And then a setup window display. 2. Select Record and set the values. 3. Select Disk and set the values. -
Page 98: Local Playback And Remote Playback
4. Click RECORD ON button. And the color of button is changed. 5. Live video data is recorded as set in Record and Disk setup. These video data can be searched and play-backed with Local Playback. 9-8-5. Local Playback and Remote Playback 9-8-5-1. - Page 99 9-8-5-2. Playback of recorded video on remote DVR 1. Click REMOTE PLAYBACK button. And then Playback Window display over Live Window. 2. Select site to connect from the directory window. 3. Click CONNECT button. And then Green bar displays on Search calendar and slide window. 4.
-
Page 100: Avi Backup During Playback
9-8-6. AVI Backup during playback You can back up the recorded videos in AVI format during playback. 1. Double-click the target channel to backup. 2. Select the beginning time by using the search calendar and slide bar. 3. Click MARK IN button, when the scale of the timeline is located on the target time as the beginning time of backup. - Page 101 6. You can also set the beginning time and ending time on this window. After selecting a channel for backup, click the OK button. The backup will begin. 7. AVI video data is recorded as set in AVI Backup window. AVI format video can be played back by Window Media Player™...
-
Page 102: Network - By An Web-Browser Viewer
10. Network – By an web-browser viewer The DVR provides a live remote monitoring feature by web-browser viewer. 1. Check the IP address of the DVR from SETUP>SYSTEM>DESCRIPTION>IP ADDRESS. 2. Input the IP address or Domain name address that you pre-registered on www.bestddns.com on the address field and press “Go”. - Page 103 6. Click CONNECT button on the Left upper corner of web-viewer. Then “Connect” dialog is displayed. Enter IP address (or Domain name address that you pre-registered on www.bestddns.com, www.okddns.com or www.ddnscenter.com, Port number and Password and click “Connect” Server address: Input IP address of the DVR from SETUP>SYSTEM>DESCRIPTION>IP ADDRESS or Domain name address that you pre-registered on www.bestddns.com, www.okddns.com or www.ddnscenter.com, Port: Input Port number (The number is set on SETUP>NETWORK>PORT.)
- Page 104 ID: Input ID of DVR. Password: Input network password of DVR. (The number is set on SETUP>SYSTEM>NETWORK PASSWORD.) 7. Then the cameras connected to the DVR are displayed on the screen. 9. SETUP: The menu settings for the DVR unit can be set from a PC, via network. Refer to the detail of Remote Setup description of UMS Multi Client.
-
Page 105: Appendix: How To Connect Network
APPENDIX: How to connect network A. How to set IP address of the DVR and open TCP port of the router? The port forwarding is dependent on the brand and model of the router. The port forwarding is required to allow access to the DVR beyond a router. - Page 106 Open your web browser. Enter the router IP address in the address bar (the router IP address are different with the brand and model.), click GO. 4. Enter the user name and password (admin is default) and press the OK button. 5.
- Page 107 7. Select the Save settings button located on the bottom of the window. Then Port forwarding is finished. Network access beyond a router In order to access the DVR remotely beyond a router (firewall), the user must open TCP port for command level, live channels and storage channels.
- Page 108 4. Input Site Name, Site Address(IP address), Port No., and Password on the connect window. And click OK. Then, press button after checking the left check box. Internet (ADSL) Connection using DDNS Connect to the system, using an Router or ADSL modem and an Ethernet cable (10BASE-T/100BASE-TX CAT 5 LAN cable) 1.
- Page 109 MAC Address: Input the Mac address (EX. 0002690XXXXX) without any space. Serial Number: Input the Serial No. (EX. HD0410SA1100XXX.) without any space. 5. Domain Name: Input Domain Name for your DVR system 6. Click the DUPLICATION CHECK button to see if the domain name is available. 7.
- Page 110 C How to access HD SDI DVR with Iphone? 1 Connect to APP store in Iphone and search iUMS 2 Click on the application, and then you will see the application detailed description, click on free...
- Page 111 3 The free will become install...
- Page 112 4 Click on Install, it will ask you the itunes account password to enable the installation 5 Wait during installation until the icon iUMS appear in color in your Iphone...
- Page 113 6 Click on the iUMS icon to run the program, you will see the device list, to add a device press on the + icon 7 Click on the IP right arrow to key the ip adress of your dvr, do the same for the password. Default password is 1111...
- Page 114 8 After you key all the information you should see this 9 Click on Save...
- Page 115 10 Click on your device in the device list 11 Click on connect...
- Page 116 12 You will see the live picture of your dvr...
- Page 117 D How to access HD SDI DVR with Android Smartphone? 1 Go to Google play on your Smartphone and search iUMS, the results will be shown on screen, select iUMS 2 It will give a description of the program, click on Install...
- Page 118 3 Then click on Accept and Download 4 The program will be installed on your Smartphone, when the installation is finished; you should see this, then click on Open...
- Page 119 5 Press on Live view 6 Register your DVR and input the IP address or domain name, ID and password.
- Page 120 7 Click on add, then you will see your device in the device list 8 Select the channel you want to see then click on Start...
- Page 121 9 You will see the live picture of your dvr Via Don Arrigoni, 5 24020 Rovetta S.Lorenzo (Bergamo) http://www.comelitgroup.com export.department@comelit.it e-mail:...