Panasonic CS-G93KE Service Manual page 56

CS-G93KE
Servicing Information
c. Outdoor Electronic Controller Removal Procedure
1. Remove the top panel and front panel
Fig. 20
1 Remove screw
5 Remove Front
Panel
4 Remove 2 screws
2. Remove the Outdoor Electronic Controller
Fig. 22
6 Remove 5 screws
7 Disconnect all connectors
! Caution! When handling electronic
controller, be careful of electrostatic
discharge.
3 Remove Top Panel
2 Remove 2 screws
– 61 –
!
WARNING
• Be save to return the wiring to its original
position
• There are many high voltage compo-
nents within the heat sink cover so never
touch the interior during operation. Wait
at least two minutes after power has
been turned off.
Fig. 21
! Warning ! Do not touch High Voltage Area
Fig. 23
Note : Use magnetic type of screw driver to
avoid dropping of the screws
8 Remove the
electronic
controller