Replacing The Suction Turbine - Kärcher BR 45/40 Service Manual

9.6 Replacing the suction turbine

1 Locking screw for fresh water reservoir
2 Fresh water tank

Unscrew the locking screw for the fresh water res-
ervoir.

Tilt the fresh water reservoir rearward.
1 Fastening screw
2 Hose clip
3 Connecting cable
4 Sound insulation hose

Remove the connection cable.

Loosen the hose clamp and pull the sound insulat-
ing hose off.

Remove the fastening screws of the suction tur-
bine.

Remove the suction turbine.
Installation in reverse order
Note
If the suction turbine is damaged by water entering,
the float in the wastewater reservoir must be checked
for its functionality and repaired if necessary.
English 5.906-269.0 Rev. 00 (03/11)
93