Top-Up; Change The Engine Oil; Checking/Replacing The Air; Clean And Change Spark - Kärcher KM 100 R B Operating Instructions Manual

Operating instructions
Check engine oil level and

top-up

Warning!
The engine is provided with an oil
shortage switch. When the level is
too low the engine switches itself off
and cannot be restarted until the
engine oil has been topped up.
Danger!
Danger of burns!
! Let the engine cool-down
! Wait at least 5 minutes after
stopping engine before
performing the check
! Open unit cover, engage stay bar
! Turn out oil dip stock
! Wipe and insert oil dip stick
KM 100/100 R B / KM 100/100 R LPG
! Pull out oil dip stick
— At least a third of the oil dip stick
must be immersed into the oil.
— Refill engine oil up to lower edge
of tank inlet if the oil level is
below it.
! Fill engine oil using the oil
change pump 6.491-538
! Close the oil fill opening
! Wait for at least 5 minutes
! Check the engine oil level
For oil grade see: Technical data

Change the engine oil

! Turn out oil dip stock
! Suck out engine oil with oil-
change pump 6.491-538 through
the oil filler
! Fill in new engine oil with a clean
6.491-538 oil change pump using
the oil filler
For oil grade see: Technical data
! Close the oil fill opening
! Wait for at least 5 minutes
! Check the engine oil level

Checking/replacing the air

cleaner
! Open unit cover, engage stay bar
! Unscrew wing nut
! Remove, check and clean filter
insert
! Insert clean or new filter insert
into the suction container.
! Tighten the wing nut
English

Clean and change spark

plug

! Open unit cover, engage stay bar
! Remove the spark plug
connector
! Screw the spark plug out and
clean it
! Screw the cleaned or the new
spark plug in
! Plug in the spark plug connector.
36