Vacuum Bar - Kärcher BR 45/40 Service Manual

5.5 Vacuum bar

1 Winch, raise/lower suction bar
2 Wing nut, suction bar attachment
3 Wing nut, setting of the tilting position of the suc-
tion bar
Note
The front suction lip is grooved by default, the rear
one is smooth.
Both suction lips can be reversed in case of wear and
tear.
16
English 5.906-269.0 Rev. 00 (03/11)
4 Vacuum lip
5 Tilt roller
6 Suction hose
7 Scraper roller
1 Winch, raise/lower suction bar
2 Locking tab
3 Lever, raise/lower suction bar
To lower the suction bar, push the lever to raise/lower
the suction bar to left and then swivel it downward.
If the suction bar does not remain in the raised posi-
tion, the tab to lock the lever must be checked for
wear.