Replacing The Toothed Belt - Kärcher BR 45/40 Service Manual

9.7.2 Replacing the toothed belt

1 Pinion of disc brush
2 Gear belt
3 Drive pinion, brush motor
4 Brush motor

Pull the toothed belt off of the pinion of the disc
brush.

Remove the toothed belt from the drive pinion.

Place a new toothed belt onto the drive pinion.

Slide the toothed belt onto the pinion of the disc
brush.
Note
The belt tension is created when the toothed belt is
installed.
96
English 5.906-269.0 Rev. 00 (03/11)