Editing Programs - BenQ VB3233 Quick Start Manual

V32B_V37B_EN.book Page 39 Wednesday, January 23, 2008 10:55 AM
3. Press
system. The tuning result will display on-screen in real-time. If the tuned
program is incorrect, press
located. You can directly input the frequency using the Program selection
numeric buttons on the remote control if you wish.
4. Press
reception of TV signal (only necessary where the image or sound reception
is poor).
5. Press
format for the Teletext function according to the table below:
Text code Language
Char.1
Char.2
Char.3
Char.4
Char.5
Char.6
6. Press
selection numeric buttons on the remote control to enter the number
(location) for this program. Press
7. Press

Editing programs

After the TV programs are scanned and stored in the TV's memory during the
First Turn On
the Auto Installation function, you can edit these programs by deleting
unwanted programs, adding a program name or changing the program
position number.
This option is not possible when the Child Lock is activated. See
page 42.
to highlight Frequency
+ or -
to highlight Fine Tune and then press
Text Code
to highlight and then press
West European languages
East European languages
Turkish/Greek
Cyrillic languages
Arabic languages
Farsi languages
Store on PROG.
to highlight
MENU to save the program and close the menu.
operation (see "9. Initialize your TV" on page
and then press + or - to start the tuning
again until your desired program is
+ or - to adjust the
+ -
or to select a code
, and then press the Program
OK to confirm.
8) or after using
OSD (On-Screen Display) menu
"Child Lock" on
39