Installing The Swivel (Vb3233 Model Only); Important Safety Notes; Installing The Swivel - BenQ VB3233 Quick Start Manual

V32B_V37B_EN.book Page 4 Wednesday, January 23, 2008 10:55 AM

4. Installing the swivel (VB3233 model only)

Important safety notes

Please pay attention to the following before installing:
• For safety reasons, it is recommended that the installation be carried out by
at least two adult persons.
• The LCD panel of the TV is extremely fragile and subject to damages easily.
Avoid touching the LCD panel when installing or moving the TV, and take
precautions not to let any objects come into contact with the LCD panel. It is
recommended that you use a soft, clean and lint-free towel to protect the TV
and LCD screen when installing.
• Pay attention to the stability of the location where the TV will be placed.
Otherwise the TV may topple over and result in damages and personal
injuries. Have a qualified technician secure the TV in case there is an
earthquake.

Installing the swivel

1. With the wider side of the swivel
facing forward, install the plastic
rings on the swivel shaft.
2. Refer to the illustration for the
correct position of the plastic rings
on the shaft.
direction of the V-shaped part of
the plastic rings is correct.
3. Lift the TV up and insert the swivel
shaft into the swivel shaft hole on
the bottom of the TV at an angle of
30 degrees. When inserting, make
sure that the stoppers on the TV
are properly aligned and inserted
into the positioning holes on the
swivel base.
4 Section 1: Quick Start Guide
Make sure that the
Plastic rings
Wider
side
Pay attention to
the V-shaped
part of the
plastic rings
30
o
Shaft
Shaft
Plastic
rings
Stoppers
Positioning
holes