Table of Contents
Advertisement
10. Initialize your TV
Press Power button on the remote control. the TV will turn on and the power indicator
will light up green. When first turned on (and until tuned), the Initial Menu will display:
Before you can use your TV to view TV programs, you need to let it search for and tune
TV station programs appropriate to your region. This process only needs to be done when
the TV is newly installed, or whenever you install it in OSD menu for convenience of
operation.
1. When Language is highlighted, use the
guage displayed on the menu.
2. Press ▼ button to select Auto Tuning and press the OK button.
3. Press
or
Start and press OK. The Auto Tuning automatically creates a list of receivable chan-
nels. Press the BACK button at any time to interrupt the memorization process. (The
list cannot be created if interrupted)
11. View the TV programs
Press P ▲ or P ▼ on the remote control to sequentially cycle through your TV
•
channels.
•
To select a single- or double-digit channel, press the corresponding channel
selection buttons on the remote control. For example, to select channel 8, press 0
and 8 on the remote control.
•
Press
indicator will increase in length as volume rises.
•
Press Mute on the remote control to turn off the sound temporarily. Press Mute
once more, or press
•
You can press
channel.
10
Section 1: Quick Start Guide
( ◄ or ► ) to select the Country where you operate the TV, then select
+ or
- on the remote control to increase volume. The volume
+ or
on the remote control to quickly return to the previous viewed
( ◄ or ► ) buttons to select the lan-
or
- to restore the sound level.
Advertisement
Table of Contents
