Initialize Your Tv; View The Tv Programs - BenQ MK2442 User Manual

10. Initialize your TV

Press Power button on the remote control. the TV will turn on and the power indicator
will light up blue. When first turned on (and until tuned), the Initial Menu will display:
Before you can use your TV to view TV programs, you need to let it search for and tune
TV station programs appropriate to your region. This process only needs to be done when
the TV is newly installed, or whenever you install it in OSD menu for convenience of
operation.
1. When Language is highlighted, use the ◄ or ► buttons to select the language dis-
played on the menu.
2. Press ▼ button to select Auto Tuning and press the OK button.
3. Press ◄ or ► to select the Country where you operate the TV, then select Start and
press OK. The Auto Tuning automatically creates a list of receivable channels. Press
the BACK button at any time to interrupt the memorization process. (The list cannot
be created if interrupted)

11. View the TV programs

Press PROG ▲ or PROG ▼ on the remote control to sequentially cycle through
•
your TV channels.
• To select a single- or double-digit channel, press the corresponding channel
selection buttons on the remote control. For example, to select channel 8, press 0
and 8 on the remote control.
• Press VOL
indicator will increase in length as volume rises.
• Press Mute on the remote control to turn off the sound temporarily. Press Mute
once more, or press VOL
• You can press RETURN on the remote control to quickly return to the previous
viewed channel.
10 Section 1: Quick Start Guide
or VOL on the remote control to increase volume. The volume
or VOL
to restore the sound level.