Table of Contents
Advertisement
V32B_V37B_EN.book Page 7 Wednesday, January 23, 2008 10:55 AM
Remote control usage tips
• Point and aim the top front of the
remote control directly at the TV
when pressing the buttons.
• The remote control must be held at
an angle within 30 degrees of the TV's
remote control sensor window to
function correctly. The distance
between the remote control and the
sensors should not exceed 6 meters.
• Do not cover the sensor window on the front of the TV (below the power
indicator lamp), or place objects in front of it which will block the direct line-
of-sight between the remote control and the sensor window on TV.
• Do not let the remote control become wet, or place it in humid environments
(like bathrooms.)
• If the remote control sensor window on the TV is in direct sunlight or strong
light, the remote control may not operate properly. In this situation, change the
light source or readjust the angle of your TV, or operate the remote control from
a location closer to the remote control sensor window on the TV.
Test the remote control
Press
(Power/standby)
highlighted in the illustration). The TV should turn on, and
the power indicator change to green. If so, progress to the next
step
("9. Initialize your TV" on page
If the TV does not turn on, first check that the power is
available (the power indicator will be lit red). If so, try pressing
(Power/standby)
on the right side of the TV. If the TV
turns on by this method, the problem lies with the remote
control. In that case, check that the remote control batteries
are properly installed. If need be, replace the batteries with
new ones or known good ones.
To put the TV to standby mode, press
the remote control, or
the TV again, and the TV will return to standby mode (the
power indicator will turn red.)
6 meters
30 degrees
on the remote control (as
8).
(Power/standby)
(Power/standby)
on the right side of
Section 1: Quick Start Guide
on
7
Hide quick links:
Advertisement
Table of Contents
