V32B_V37B_EN.book Page 36 Wednesday, January 23, 2008 10:55 AM
Adjusting the contrast
1. Set the contrast to the highest level.
2. Gradually decrease the contrast level until you reach the point where the
details in the bright areas of the image can be seen clearly. Do not further
decrease the contrast level to avoid losing the saturation of colors.
Adjusting the brightness
1. Set the brightness to the lowest level.
2. Gradually increase the brightness level until you reach the point where the
details in the dark areas of the image can be seen clearly. Do not further
increase the brightness level to avoid the black areas from looking grayish.
Setting up the Personal Picture Mode
You can adjust the settings in the
Personal
Picture Mode.
MENU
1. Press
2. Press
+
or
3. Press
or
Personal
.
4. Press
or
and then press
5. Press
MENU
36
OSD (On-Screen Display) menu
Picture
to display the OSD menu on-screen.
-
to select
Picture
, and then press
to select
Picture Mode
to select
Contrast
,
Brightness
+
-
or
to adjust the settings to your satisfaction.
to save the settings and close the OSD menu.
menu and save them as your
OK
to enter the
Picture
, and then press
+
or
-
to select
,
Color
,
Sharpness
menu.
..., etc.,