Table of Contents
Advertisement
2. If the Country menu item is set to Other, you should press
according to your region.
3. Press
to highlight Selected PR and then press the program selection buttons on the remote
control to input the TV program you want to set up.
4. Press
to highlight Frequency and then press
program is incorrect, press or
directly input the frequency using the numeric keys if you wish.
5. Press
to highlight Fine Tune and then press
(only necessary where the image or sound reception is poor).
6. If the SCART signal input is connected, press
select from the following options:
• On: Select this option if an external decoder Set-Top-Box (STB) is being used.
• Off: Select this option if no external decoder STB is being used.
7. Press
to highlight Text Code and then press
function.
8. Press
to highlight Store on Prog. and then press OK to save this program to the TV
program memory.
9. Press MENU to close the menu.
Editing programs
You can delete unwanted programs, add a program name and change the program position
number.
This option is not possible when the Child Lock is activated. See
Naming a program
1. In the TV menu, press
Program Edit menu will appear.
2. Press
to select Selected PR, and then press the program selection buttons on the remote
control to select the program you wish to name.
3. Press
to highlight Edit Name then press OK.
4. Press
or to highlight the character you want to edit, and then press
to your desired character.
5. Repeat step 4 to edit other characters.
6. Press OK to store the name.
7. Press MENU to close the menu.
Swapping programs
1. In the TV menu, press
2. Press
to select Selected PR, and then press the program selection buttons on the remote
control to select the program you wish to relocate to a different position.
3. Press
to highlight PR Swap, and then press the program selection buttons on the remote
control to select the new location for the program. Two digit entry is required. For example,
again until your desired program is located. You can
or
to select Program Edit and then press OK. The following
Program Edit
Selected PR
Edit Name
PR Swap
PR Lock
PR Delete
or
to select Program Edit and then press OK.
or
to select a TV standard
or
to start the tuning system. If the tuned
or
to adjust the reception of TV signal
to highlight Decode and then press or
or
to select a code format for the Teletext
"Child Lock" on page
12
------
01
Off
Back
BACK
On-Screen Display (OSD) menu
to
36.
or
to change it
35
Advertisement
Table of Contents
