Getting To Know The Remote Control - BenQ VB3233 Quick Start Manual

V32B_V37B_EN.book Page 17 Wednesday, January 23, 2008 10:55 AM

Getting to know the remote control

1. Power/standby
Press this button to power the TV on or put it to the
standby mode. See "Power on, off and standby" on
page 20.
2. INPUT
Press this button to select an input source (except TV
input). See "Switching to other input sources (except
the TV input)" on page 20.
3. TV
Press this button to switch to the TV input directly
and view TV programs. See
directly" on page 20.
4. Index
Press this button to go to the Teletext index page. See
"Using the Teletext function" on page
5. Freeze/Teletext freeze
/
• Press this button to freeze the image on the screen.
Press the button again to resume viewing in real
time. See "Using the freeze function" on page
• When Teletext displays on-screen, press this button
to freeze Teletext messages. Press it again to restore
normal update. See "Using the Teletext function" on
page 23.
6. Aspect/Teletext size
/
• Press this button to adjust the screen image aspect
ratio. See "Using the Teletext function" on page
• When Teletext displays on-screen, press this button
to enlarge Teletext size. Press it again to resume
normal size. See "Using the Teletext function" on
page 23.
7. Subpage
Press this button to enter the subpage of a Teletext
menu. See "Using the Teletext function" on page
8. Reveal
Press this button to display any concealed Teletext
information (such as answer to a quiz). See
the Teletext function" on page
9. Mode
Press this button to cycle the Teletext display mode
between Teletext only or with Teletext superimposed
on the display. See "Using the Teletext function" on
page 23.
Getting to know the remote control
"Selecting the TV input
23.
22.
23.
23.
"Using
23.
17